Mechanical Steam Jet Mill Classifier

Mechanical Steam Jet Mill Classifier Technology is one of the important basic technologies in the modern industry. In the modern industry, the material required to be a powder state has a small and uniform particle size and higher purity, and ultrafine raw materials. Its nature changes, which makes ordinary materials have a broader application range,

Mechanical Steam Jet Mill Classifier is based on the size of the powder particle size, the specific gravity is different, and the settlement speed in the gas is different. Hierarchical processing. The grading machine, the cyclone, the dust collector, and the air conditioner form a set of hierarchical systems. Under the action of fan pulleys, the material is exercised at a high speed, and the up airflow into the grading area. Under the action of high-speed rotary grading turbine, the coarse, fine particles are separated, and the clearance of the granularity required by the gap of the grading wheel blades is collected into the cyclonic separator or the dust collector. After the crude particles are partially fine particles, after the wall, the speed of the wall to the secondary exhaust is disappeared and reduced.

The thick washing effect of the secondary wind, the thick particles are separated, and the fine particles rise to the secondary grade of the grade, and the crude particles reduce the discharge port.

The working principle of Mechanical Steam Jet Mill Classifier is to use a high-speed rotating hammer impact material, crushing the decision surface, the obedient surface and the natural gap. The material sent to the crusher is affected by the rotor, and the rotor rotates around the central axis at a speed of 25 to 40 m / s, and breaks the first time. The material then obtains the energy disc from the rotor, flying on the hard wall at high speed, and performs secondary comminution.

If you want to make a big performance during the work, the maintenance is not less work, what is the maintenance classifier?

1. If you clean the classifier, you need to pay attention The motor should not be stained with water and the shaft is also the same.
2, if you want to change the precision classifier, or if you want to repair, you must be in the case of power failure.
3, usually pay attention to lubrication and maintenance of the bearing of the classifier.
4. If the precision classifier works for 1,500 hours, remember to add lubricating oil.
Erpi graphite Mechanical Steam Jet Mill Classifier case share: This customer is a research institution, in its research, the graphite needs to be superfined. The Mechanical Steam Jet Mill Classifier of our El Pie was finally selected by multiple incoming experiments.

Technical parameters:

finished particle size: D50: 10-30μm
Production capacity: 30-50kg


To learn more about Mechanical Steam Jet Mill Classifier, To Shandong El Pie Powder Technology Co., Ltd., the company is in the development and production of crusher and crusher related products, quality, and is a welcome, trustworthy.