Most of the product production and processing in the current phase, using Superfine Steam Jet Mill Micronizer is a very common way of processing, with the continuous improvement of scientific productivity, and the technology of grading equipment It is also imminent to replace it. The performance and internal configuration of the grading equipment of the airflow must also keep the trend of the era to continue the upgrade of the product.
For the service life of Superfine Steam Jet Mill Micronizer, it is necessary to keep in mind using common sense.
1. For new buying equipment, novice must understand its operating specifications. If it is a novice operation, it is necessary to prevent unnecessary losses due to improper operation during operation.
2, if the operation is abnormal, if the machine is abnormal, it is necessary to keep the mechanical personnel to repair commissioning and turn off the power. Non-designated personnel prohibit private commissioning or disassembling machine components during the maintenance process. When repairing commissioning, you must turn off the machine power.
3, the Superfine Steam Jet Mill Micronizer is cleaned in time after use. Keep the inside of the Superfine Steam Jet Mill Micronizer to avoid oxidation of the material and the inner contact.
Main performance characteristics of airflow pulverizer: 1, it includes vertical classification equipment, product size D97: 8 150 microns adjustable, granular shaped distribution narrow. It can be used in series with multi-stage classifiers, or producing multiple granular products at a time. 2, the device is disassemble and cleaning, the inner wall is smooth, no dead angle. The entire system is closed, less dust, low noise, clean and hygienic production process. 3. The control system uses program control and easy to operate.
After long-term use, it is necessary to clean the Superfine Steam Jet Mill Micronizer. All machines should be disassembled before the airflow pulverizer is cleaned. When cleaning, the power supply can be turned off, and the remaining dust can be removed directly with a brush. We must remember to clean it layer by layer. When unloading, you can remove the four screws on the base and remove the hopper. When sieved, the air pulverizer door can be opened directly, and finally the screen can be disassembled. After removing the mobile gear, release the fastening nut first, then separate the live teeth from the spindle. Then remove the active gear and place it safely. Remove the fixed gear, remove the screw and remove the fixed gear. Be careful when disassembling the air pulverizer and never allows damage to the machine components.
El Pie Mill Micronizer Case Sharing: This customer is a renewable resource company, the customer needs to select a different particle size selection of composite powder, and it is necessary to select ultrafine powder less than 30μm. . Investigate a number of domestic grading equipment manufacturers, did not find the right equipment, and finally found the right equipment in our Else, and selected our vertical grading machine equipment. Product particle size: D97 ≤ 30μm hour yield: 80T
Welcome major composite powder manufacturers to visit, incompetent experiments.Welcome everyone chooses Shandong El Pie Powder Technology Co., Ltd., the company is committed to Superfine Steam Jet Mill Micronizer products and services, our company provides Superfine Steam Jet Mill Micronizer, the price is low, if you are Interest, please feel free to contact us.
