It is well known that the product technology of Laboratory Mechanical Steam Jet Mill Equipment has been widely valued by the industry.
Laboratory Mechanical Steam Jet Mill Equipment work is also a factor affecting work efficiency. When the temperature of the working fluid is too high, the flow rate of the gas will increase. Taking air as an example, the critical speed at room temperature is 320 m / sec, and when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by overheating steam, the vapor pressure is typically from 0.8 to 1.7 MPa, and generally the pulverized calcined material is high, and the material after the pulverized surface is low.Characteristics of Laboratory Mechanical Steam Jet Mill Equipment:
1. The pulverizer is large, the energy consumption is low, and the grading efficiency is high.
2, the particle size concentration: the pulverizer is classified by the original impeller. Stable grading technology and special sealing measures effectively prevent leakage of crude particles, so that the product has no large particle size, with high classification accuracy.
3, the structure is reasonable, the pulverizer can produce 1-6 products at the same time according to user requirements.
4, the applicability is strong: the pulverizer can be combined with various Mills (air compressors, mechanical ball mills, ball mills, Raymond grim, vibration, etc.) to form a closed or open joint operation.
5, the degree of automation:
When you purchase Laboratory Mechanical Steam Jet Mill Equipment, you need high pulverity and no loss. However, before purchasing, it is necessary to fully understand the internal structure of the ultrafine pulverizer and the advantages and disadvantages in the production application. After sufficient understanding, we can better choose and apply. Today, let us learn about the disc air pulverizer:
1. Low powder temperature: no cooling system during continuous operation, the powder temperature generated Never less than 50 degrees;
2. It can be applied to any fiber, high toughness, high hardness or a certain moisture content; for pollen or other spore plants, the material destroying the cell wall can break through 95%; 123]
After understanding the characteristics of the ultrafine pulverizer, when you slightly When you purchase, you should pay more attention to it, then you will choose your satisfactory ultrafine pulverizer.
Erpi Stone Sand Laboratory Mechanical Steam Jet Mill Equipment Case Sharing: This customer needs to grades Quartz sand, compared to many powder equipment manufacturers, and finally pass the experiment, and finally choose We Sending machine equipment. Product particle size: D95: 45μm hour Yield: 8-12T Welcome major stone sand manufacturers to visit, incompetent experiments.
If there is a use requirement for Laboratory Mechanical Steam Jet Mill Equipment and questions, please contact us,
