Small Mechanical Steam Jet Mill Classifier This product technology has received extensive attention from the industry. The grinding mechanism of Small Mechanical Steam Jet Mill Classifier is mainly used to determine its wide range of applications, high fine, typical materials: super hard diamond, silicon carbide, metal powder, high purity requirements: ceramic pigment, medicine, biochemistry, medicine . Small Mechanical Steam Jet Mill Classifier converts the normal gas from the gas source portion to nitrogen, carbon dioxide, etc., is an inert gas protection device, which is suitable for use in flammable and explosive, oxidative materials, pulverization, grading, and processing.
Small Mechanical Steam Jet Mill Classifier is a very good application of the powder industry. Small Mechanical Steam Jet Mill Classifier is a supersonic air flow by a nozzle to form an ultrasonic air flow by a nozzle after refrigeration, filtration, drying. Accelerated materials gather at the intersection of multiple nozzles jet gas flow, resulting in severe collisions, friction and shearing, thereby achieving ultrafine pulverization of particles. The gas flow grinding has the characteristics of low energy consumption, stable operation, simple structure, convenient operation and maintenance. It is real multi-purpose, high efficiency, low-cost new crushing equipment. It can be said that modern industrial production is inseparable from airborne flow, but gas flow mills often need to operate continuous operation, long working hours, which is wear for equipment itself.What are the characteristics of Small Mechanical Steam Jet Mill Classifier? Xiaobian is to analyze the features it has.
1. This micro-jet classifier is mainly designed for research and development departments of colleges and research institutes and enterprises; 2, its volume is very small and easy to move, in the crushing space is not very spacious, use This classifier is very convenient; of course, according to the actual situation.
3, the sample loss in the classifier is very small, and the grading of a small amount of valuable sample is very suitable.
Small Mechanical Steam Jet Mill Classifier is widely used, do you know how to use it correctly? The following content hopes to help you.
1. Preparation before departure. Check whether the host, joint, pipeline, and the valve are normal, working properly.
(1) Turn on the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.
(2) From scratch, adjust to the specified speed.
(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the sequence of stops is:
inverter-feeder-main air valve-compressor-grade impeller-motor cyclone material, dust removal switch-fan-main power supply-air compressor .
4, Maintenance
(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature too high.
(2) Checking the wear of impeller, helical conveyors and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After a filter bag, you should clean or replace it.
5, Precautions
(1) When the discharge equipment is running, the unloading port cannot be reached, and the accident occurs.
(2) The impeller speed must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
El Piece Composite Powder Small Mechanical Steam Jet Mill Classifier Case Sharing: This customer is a cement manufacturer, wants to deliver the cement filler composite powder, select the composite powder of the appropriate particle size section, thus Enhance the performance of the cement. Investigate the domestic powder equipment manufacturer, and finally chose our El Pie's classifier to achieve the pursuit of large capacity, and ensure the particle size of the powder.
Case parameters:
Powder particle size: D50: 6.8μm
Hour Yield: 25T
For powder production companies, customized production, non-standard customized products are an advantage . The demand for each company is different. Therefore, the non-standard custom of powder equipment has been spawned, and our Shandong Erpa is a powder equipment non-standard custom enterprise. The crushing equipment made for Taiwan companies is a good case. Welcome companies with powder equipment customization needs to contact us.
The company provides free experiments and testing, and provides 24-hour consultation services, welcome to use.
