With the continuous increase in social needs, Ultra-Micro Mechanical Steam Jet Mill Pulverizer is constantly improving in terms of performance, finished product quality, service life, etc., very good, processed raw materials into micro-powder, and also It has been widely used in many fields such as chemical, food, pesticides, cosmetics, dyes, coatings, and electrons.
Many manufacturers who want to make a crushing process will choose to purchase a Ultra-Micro MeChanical Steam Jet Mill Pulverizer, but not all crushers can apply production and processing, erroneous processing methods will make pulverizer wear The speed is fast. The wear of the pulverizer is too fast, and the inner cavity of the pulverizer of the comparison should be used when the material hardness is too large. The equipment operates for a long time in a higher crushing pressure, which requires uniformity of cyclical replacement loss. The products after the crushing products are generally single peaks. If there is a double-peak or peak main reason, the pulverization pressure is unstable. The solution is based on the gas supply of gas source equipment to meet the amount of gas required for work, ensuring that the lowest air supply pressure of the gas is high than the working pressure. The feed speed is unstable. Solution to check if there is a blockage at the feed valve; the material is not very viscous, uniform in liquidity, and the stable control feed speed. The filter cake is formed in the pulverizer chamber. The solution is suspended, and the filter cake in the pulverizer chamber will then restore production.
Ultra-Micro Mechanical Steam Jet Mill Pulverizer works airflow pulverizer and cyclone separator, dust collector and air machine body form a complete crushing system. After filtration and drying, the compressed air is injected into the crushing chamber through a high speed sluice nozzle. At the intersection of multiple high pressure airflow, the material repeatedly collides, friction, shear and crushing. Under strength, the thickness, fine product is separated, and the fine particles that meet the particle size requirements are collected by the cyclone and the dust collector by the grading wheel, and the crude particles reduce the crushing area to continue to break.
Ultra-Micro Mechanical Steam Jet Mill Pulverizer is a crusher, any mechanical equipment, has certain precautions before use, must check the precautions to operate, reduce the damage rate The lowest, what is the precaution before using a jet ball mill? Here are some introductions.
1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.
2, the pulverizer should be lubricated in accordance with the requirements so that the machine is operating normally.
3, the material cannot be mixed before the grinder is added to avoid damaging the pulverizer.
4, the pulverizer does not have foreign matter or debris. If it should be handled in time to avoid damage to the tool.
5. When using the crusher, if there is abnormality, it should be treated immediately to avoid a large loss.
6. If damage should be replaced immediately, certain components should be checked.
El Pecaric carbonate Ultra-Micro Mechanical Steam Jet Mill Pulverizer case Sharing: This customer is a company, selling new materials such as lithium carbonate, lithium hydroxide, potassium sulfate, and salt, selling carbonated in it. During the lithium, it is found that the current customer needs is ultrafine powder of lithium carbonate, so it has upgraded the production line of lithium carbonate, purchased a number of Ultra-Micro Mechanical Steam Jet Mill Pulverizer of our El Pie.
Technical parameters:
Finished granularity: D50: 5-8μm
Production capacity: 450kg
Is it for maintenance Ultra-Micro Mechanical Steam Jet Mill Pulverizer I have learned more. For more information, please continue to pay attention to our website.
