Horizontal Steam Jet Mill Machine is a crushing equipment commonly used in industrial production. Due to its excellent performance, it is widely used in the pulverization operation of various materials. Although this work is very prominent, we still have to look at the machine, just like a normal machine, check the machine, eliminate the machine failure, make the machine more efficient and safely.
Horizontal Steam Jet Mill Machine work is also a factor affecting work efficiency. When the temperature of the working fluid is too high, the flow rate of the gas will increase. Taking air as an example, the critical speed at room temperature is 320 m / sec, and when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by overheating steam, the vapor pressure is typically from 0.8 to 1.7 MPa, and generally the pulverized calcined material is high, and the material after the pulverized surface is low.
The main performance characteristics of the airflow pulverizer: 1, it includes vertical grading equipment, product size D97: 8 150 microns adjustable, good particle shape, narrow particle size distribution. It can be used in series with multi-stage classifiers, or producing multiple granular products at a time. 2, the device is disassemble and cleaning, the inner wall is smooth, no dead angle. The entire system is closed, less dust, low noise, clean and hygienic production process. 3. The control system uses program control and easy to operate.
Any mechanical equipment, there must be certain precautions before use, must check the precautions to operate, so that the damage rate is lowered, so Horizontal Steam Jet Mill Machine takes what is used? Precaution?
1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.
2, lubrication should be carried out in accordance with the requirements to make the machine operating properly.
3, the material cannot be mixed before the grinder is added to avoid damaging the pulverizer.
4, foreign matter should not be treated in time to avoid damage to the tool.
5. When using the crusher, if there is abnormality, it should be treated immediately to avoid a large loss. 6. If damage should be replaced immediately, certain components should be checked regularly.
Elpaign Schite Powder Horizontal Steam Jet Mill Machine Case Sharing:
A silicon micron powder company has the main products with molten stone sand, molten silicon fine powder, soft composite silicon fine powder, high purity ultrafine silicon powder, active silicon Micro powder, crystalline silicon fine powder, spherical silicon fine powder and other specifications.
Main uses: photovoltaic solar industry and electronic packaging materials, high temperature refractory materials, aerospace materials, quartz glass tubes, quartz ceramic rolls, and coated copper industries.
Case parameters:
Product particle size: Remove 20UM with fine powder
hour production: sorting efficiency 60-90%
If you have use of Horizontal Steam Jet Mill Machine, you have useful requirements and questions Welcome to our Erman,
