Ultra Fine Steam Jet Mill Equipment is a very practical and convenient industrial crushing equipment, most chemical industries, polymer materials need to be used, the Erfa crusher is fine, and the granules are delicate, and the price is affordable.
Ultra Fine Steam Jet Mill Equipment has a wide range of pulverized granularity, simple and convenient, but during the pulverization process, there is often a case where the crushing effect is different.
The crushing effect is mainly affected by the following factors:
The temperature and pressure of the gas ratio, the feed particle size, the working fluid, and the pulverized aid. The gas-solid ratio of the pulverizer is an important technical parameter and an important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which in turn affects the fineness of the product. However, if the gas is too high, it will not only waste energy, but will even degrade the dispersion performance of certain pigments. When pulverizing hard materials, there is a stricter requirement for the particle size of the feed. In terms of titanium powder, it is necessary to control 100 ~ 200 mesh when pulverizing calcination; the material after the pulverization surface is generally 40 to 70 mesh, and cannot exceed 2 to 5 mesh. So, should you choose how high pressure when crushing? Those skilled in the art depends primarily on the comminutability and fineness requirements of materials.
Characteristics of Ultra Fine Steam Jet Mill Equipment
2, the relative fluidized bed airflow pulverizer has a good pulverization effect on the viscous material, and the crushing process does not generate a phenomenon that the blocking material cannot be pulverized.
3, heating, grinding process due to compressed gas nozzles, temperature drop, no mechanical friction, so the grinding process does not warm, broken, suitable for low-melting thermal sensitive materials.
4. Simple equipment, convenient cleaning, convenient operation and maintenance, small area, low noise, no vibration, and so on.
The daily maintenance of Ultra Fine Steam Jet Mill Equipment is a very important part, and the maintenance method of Ultra Fine Steam Jet Mill Equipment is described below.
2. Check if the screws and nuts of each component are tightened. Check if the belt is stuck, whether it is tight.
3, regularly check the reliability of the equipment, prevent accidents or accidents.
4, the direction of operation of the spindle should be correct. If it is incorrect, it should be handled in time to avoid damage to the machine.
5, equipment maintenance should be carried out by professional and technical personnel, other people must not be carried out so as not to damage the equipment.
6, electrical components and lines should be regularly checked, whether it is intact, whether the ground is reliable.
7. The equipment should be cleaned in time to prevent the next use to avoid contamination materials.
El Piece Powder Ultra Fine Steam Jet Mill Equipment Case Sharing: This customer is a regenerative resource company, the customer needs to select a different particle size selection of composite powder, and it is necessary to select less than 30 μm. pink. Investigate a number of domestic grading equipment manufacturers, did not find the right equipment, and finally found the right equipment in our Else, and selected our vertical grading machine equipment. Product particle size: D97 ≤ 30μm hour yield: 80T
Shandong El Pie Powder Technology Co., Ltd. is a world-renowned particle and powder processing system supplier. If you want to consult, you can get the answer you want by asking Shandong Erp. Provided is not just a price of a device, there may be a powder technology solution in your industry, welcome to call us.
