Most of the current stage of the process of production and processing of products used in fine powder Steam Jet Mill pulverizer crushed product is a one of a very common way of processing and production, along with the continuous improvement of scientific productivity, grading equipment technology replacement is imminent. The performance and internal configuration of the grading equipment of the airflow must also keep the trend of the era to continue the upgrade of the product.
In terms of airflow milling, it is important to understand that its operational rules are very important, because only the operation procedures can be performed correctly.
a, fine powder Steam Jet Mill pulverizer operation rules are as follows: After preparing the production order is received before the start, to prepare materials. Complete the site to clean the grocery. Check whether the transportation pipes and auxiliary equipment, whether the pipelines are blocked, leak or poor sealing, whether the auxiliary equipment is intact, whether it can work properly. Whether there is a phenomenon that the material is stacked in the outer casing and the separator, if the accumulated material is required. Whether the bearing is lubricated, whether it is lubricated in an appropriate place. Check if all pipes, fastening bolts, washers, spindles, and instruments are intact, normal and flexible.
bis, fine powder steam jet mill pulverizer to start the motor started first, and the control current start time, enabled device starts to operate. When the equipment is operating normally, the feed speed can be adjusted according to the properties of the material. Uniform continuous feed should be achieved, not large or small, thereby affecting the separation effect of the grinding machine, making the machine easily fail. During operation, if an abnormality occurs, stop checking immediately before the failure continues.
Third, close the main and check procedures fine powder steam jet mill pulverizer as follows: Grinding Machine housing material is completely pulverized after separation, should stop feeding off the motor. After the machine is idling for 3 minutes, press the stop button to stop the machine. When the machine is completely stopped, open the check door and check the wear of the vulnerable part. Fill in the corresponding production record, update the device status flag, which is convenient for the next time.
fine powder steam jet mill pulverizer technical features:
1 high-purity, non-polluting, and unique crushing chamber classifying wheel design, make the product free of impurities, improve product purity.
2. Granular concentration: The vertical impeller used in the machine is classified. Stable grading technology and special sealing measures effectively prevent leakage of crude particles, so that the product does not have large particles and concentrated particles.
3. Structure reasonable: 1-6 granular products can be produced at the same time according to user requirements.
4. High automation: The impeller grading machines at all levels adopt electronic frequency modulated speed regulation, automatic circulation dust removal process, electronic control, automatic cleaning, and improve the mechanical negative pressure stability.
fine powder steam jet mill pulverizer is a crusher, any kind of mechanical device, before use has certain precautions must be checked Note, in order to operate, the failure rate to a minimum, so what precautions before using a jet mill is? Here are some introductions.
1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.
3, the material cannot be mixed before the grinder is added to avoid damaging the pulverizer.
4, the pulverizer does not have foreign matter or debris. If it should be handled in time to avoid damage to the tool.
5. When using the crusher, if there is abnormality, it should be treated immediately to avoid a large loss.
6. If damage should be replaced immediately, certain components should be checked.
El faction buckwheat powder fine powder steam jet mill pulverizer Case Studies:
a food company that specializes in the production and sale of beverages and foodstuffs of large joint ventures.
The company has a PET filling machine from SASIB, Italy, a PET filling machine, a PET filling machine, Italy SIPA, a PET blower, Italy SIPA, a PET blower, Italy SIPA, PET filling machine. The annual production capacity reached 300,000 tons. The company has passed ISO9001 quality system certification, and GMP and HACCP specifications are implemented and certified.
parameters of the case:
Product size: D50: 3-45um
hourly output: 1-5KG
For further inquiries, please sustained attention to us, or to inquire.
