With the continuous development of pulverizer technology, Fine Powder Steam Jet Mill Micronizer has gradually penetrated into daily life.
When the Fine Powder Steam Jet Mill Micronizer screen material, the screen has good commonity under the pressure of the rotating duct. At the same time, under the gravity of the air blower, the screen collects the qualified material, automatically discharges the material in the front cavity of the valve body by the unloading valve. The raw material powder driven by the compressed air is continuously supplied to the classifier without the need for rotating components. Through the precise control of the airflow into three products: F fine powder, m powder and G coarse powder, and collected in subsequent cyclone dust collectors and dust collectors. The material is driven by the blower of the airflow pulverizer. The lowermost inlet of the classifier is moved upward to the hierarchical area, the strobe, the strongest centrifugal force generated by the high-speed rotation grade turbine. The fine particles that satisfy the particle size are entered into the cyclone separator or dust collector by the gap of the grading wheel blades. After collecting, some fine particles of the crude particles disappear and drops along the cylinder wall to two air ports. The crude particles and fine particles are separated by strong purification of the two winds, and the fine particles rises twice as the grade region, and the crude particles fall to the discharge exit.
Fine Powder Steam Jet Mill Micronizer The working principle consists of a classifier, a cyclone separator, a dust collector, and a veneer. Under the pulverizer pulling force, the lower end of the gas pulverizer is moved upward to the grading area, and the coarse, and the fine product is separated from the high-speed rotation grading turbine. The cyclonic separator or dust collector is collected by the grading wheel, and the fine particles required to meet the particle size are collected, and the coarse particles are collected. The speed of the ellable fine particles disappears and falls along the two air ports of the cylinder wall. The crude particles and fine particles separated by strong purification of the two winds, and the fine particles rose to twice the grade region, and the crude particles drops to the discharge port.
Any mechanical equipment, there must be certain precautions before use, must check the precautions to operate, minimize the damage rate, so Fine Powder Steam Jet Mill Micronizer takes before use. What preventive measures?
1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.
2, lubrication should be carried out in accordance with the requirements to make the machine operating properly.
3, the material cannot be mixed before the grinder is added to avoid damaging the pulverizer.
4, foreign matter should not be treated in time to avoid damage to the tool.
5. When using the crusher, if there is abnormality, it should be treated immediately to avoid a large loss. 6. If damage should be replaced immediately, certain components should be checked regularly.
A silicon micron powder is a manufacturer of silicon micropowder production, and the company has strong technical strength, advanced Instrument, perfect pre-sales, sale and after-sales service, can provide high-quality crystalline silicon powder, high-purely molten fine powder, high white ultra-fine silicon powder, etc. The company is committed to providing advantageous solutions and services for other functional applications such as electronic materials, special ceramics.
The company continues to innovate around customers, and has always adhered to customer-centric, quickly responding to customer needs, and tailor-made quality products for customers, and continues to create long-lasting value for customers.
case parameters:
Product particle size: D100: 15UM
Hours Yield: 300kg
