In many crushing methods, Steam Jet Mill for Wheat Husk has become one of the most mainstream pulverization techniques with a small particle size, a narrow particle size distribution, high purity, high particulate activity, and good dispersibility. Especially suitable for crushing drugs such as contaminated materials.
High-speed jet enters the crushing chamber, collides with particles, multiple times in the friction of high pressure air, shear and pulverized, pulverized materials, and the assembly of rising airflow motion, under the action of the fan, At the powerful centrifugal force of the rotational speed of Steam Jet Mill for Wheat Husk, the thickness of the material is separated from separation, the grading wheel of fine particle size into the cyclone separator and dust removal, continues to be pulverized. The classifier produced by AlPa can perform local internal changes depending on the different characteristics of the material, so that it is more suitable for the grading requirements of the material. The grading machine has a greater processing amount, energy saving, simple operation, and low maintenance cost.
The working principle of Steam Jet Mill for Wheat Husk is to use high-speed rotating hammers to hit materials, crush the decision surface, the obedient surface and the natural gap. The material sent to the crusher was shocked by the rotor, and the rotor rotated around the central axis at a speed of 25 to 40 m / sec and was broken first. The material then obtains the energy disc from the rotor, flying on the hard wall at high speed, and performs secondary comminution.How to install Steam Jet Mill for Wheat Husk, the following content hopes to help you.
1, Chinese medicine shredder should be more smooth and easier to use.
2, before the traditional Chinese grinder work, clean processing materials must be selected. Hard metal, such as metal or stones, can not be mixed into the machine, so as not to damage parts or faults.
3, before the machine is opened, check whether the components of the machine are firm and reliable. Everything is normal, so you can work.
4, turn on the power supply, turn for 1-2 minutes, check whether the operation is normal, normal conditions, can put the material. When the crusher is working, the operator cannot leave. Once the sound is abnormal, the power supply should be disconnected immediately. In the new pulverizer raw material, the exit is fixed with a long bag.
5. When using the pulverizer, if the power supply voltage is too low, do not use it to avoid damage to the motor. The power supply is normal, it is not easy to damage, and the production efficiency is high.
Technical parameters
Finished fineness: D50: 3μm
Production capacity: 2-20kg / h
ALPA also believes that future airflow crushing technology will become better and better, users who need to purchase such products can contact us.
