Steam Jet Mill for rhizome mainly applied the pulverization mechanism determined its scope, high finished product and improvement, widely used in chemical, minerals, metallurgy, abrasives, ceramics, refractories, pharmaceuticals, pesticides, food, health care Products, new materials and other industries.
In the production process of crushing using Steam Jet Mill for rhizome, the ultrasonic air flow generated by the device can constantly collide between materials, and this aerospace air flow can also produce raw materials. A very good impact, and then the material can also have a good crushing effect with the inner wall of the equipment.
Let's take a look at how to extend Steam Jet Mill for rhizome:
1, strictly follow the operating procedures;
2, easy to damage parts should pay attention to time check, replace it in time .
3, the device body has no rotating parts, which is not affected by the lifetime of the bearing. However, due to the difference in powder hardness, the degree of wear is different, especially the wear of the hierarchy knife tip, our company's body part is made of special material, the tip service life is at least more than one year, the knife tip is more than 1 cm or more It will affect the grading accuracy, in order to avoid affecting product quality, it is recommended to contact us to replace the knife pointer;
4. It is recommended to use a long filter device to improve equipment stability, and ensure grading precision.
Let's learn about the knowledge of Steam Jet Mill for rhizome lubricants.
Selecting Steam Jet Mill for rhizome Lubricants Products To select the type and label of the lubricant according to the instructions on the device manual. General STEAM JET MILL for Rhizome equipment manufacturers will be very clear about the production and use of lubricants. This requires we choose in actual work. According to the work conditions of the equipment. For machines with higher temperatures, high viscosity oils are used, ensuring the thickness of grease under normal operating conditions, ensuring smooth flow of lubricants in low temperature environments; when the mechanical working speed is high, the viscosity is selected. Smaller oil ensures good permeability and fluidity. If the grease is too thick at this time, it will increase the operational resistance. When the load is relatively large, the oil having a slightly high viscosity should be used to ensure the thickness of the grease.
When purchasing Steam Jet Mill for rhizome lubricants, they should help their physical properties and chemical properties such as viscosity, flash point, corrosion resistance, etc., but also combined with manufacturers, considering comprehensive benefits and management. Under the premise of benefits, minimize the type and quantity of oil, to reduce financial costs. The storage of lubricants and storage of oil plays an important role in the performance of the oil. MoistWhen the oil is in contact with the non-ferrous metal, it will oxidize, which affects its performance, and corrosion can damage the machine during use.Therefore, in the storage process, it should be avoided in contact with copper.The barrel oil should be kept cleaned and ventilated, protected from light.The storage time of lubricating oil should not be too long to avoid deterioration.
The above is the Knowledge of the STEM JET MILL for Rhizome manufacturer to buy the kids of lubricant
Technical parameters:
Finished granularity: D97: 20UM
Production capacity: 10-220kg
