Air Classifier of Iron Ore Powder is one of the common ultra-fine shredded methods, widely used in non-metallic mine, drug, chemical, metallurgical and other industrial materials, ultrafine pulverization or fine pulverization, with product particle size, narrow particle size distribution The surface of the particles is smooth, the particle rules, high purity, and high activity.
A Air Classifier of Iron Ore Powder is very high, if you want to use Air Classifier of Iron Ore Powder for a long time, please pay attention to the following:
1. In the production process It should often check the temperature rise of the bearing, when the temperature rise exceeds 50 ° C, should stop the examination, find out the cause, and troubleshoot.
2. When the new machine is running, the transmission belt is easy to eliminate, so it should be noted to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should be performed in time to ensure quality and production.
4. The wear of the blade and bushing should be continuously checked. If the productivity is lowered, the particle size is thick after wear, and the wear is immediately replaced.
5.Air Classifier of Iron Ore Powder's host and level score bearing use 2 special grease (265-295 degrees) lubrication.
6. The replacement period of the bearing is 2000 hours, and the amount of oil filling of the bearing chamber gap is 1 ≤ 2 (try) or 3 ≤ 4 (try), if it is not too much, the bearing temperature It will be too high.
7. The replacement period of the spiral feeder is 4,000 hours, and ordinary calcium based grease is added. Standard operation to exchange for longer use of airflow crushers.
The above is a seven point introduction to the daily maintenance of Air Classifier of Iron Ore Power for you.
Characteristics of Air Classifier of Iron Ore Powder
1, for ultrafine pulverization of dry powder materials. The impact is large, up to 2.5 Mach. General materials are easily crushed to 1-10 microns.
2, relative fluidized bed airflow pulverizer has a good pulverization effect on viscous materials, and the crushing process does not generate clogging materials that cannot be pulverized.
3, heating, grinding process due to compressed gas nozzles, temperature drop, no mechanical friction, the grinding process does not warm, broken, suitable for low-melting thermal sensitive materials.
4, easy equipment, convenient cleaning, convenient operation and maintenance, small area, low noise, no vibration, and so on.
Let's learn with Xiaobian to learn the AIR Classifier of Iron Ore Power Inspection step.
A disc airflow pulverizer first carefully checks whether there is damage in the transportation in the transportation, then put the high machine and the auxiliary electrical control unit in place, and then turn on the pipeline of the main aircraft, each When equipped with a tube, the \"iron anchor 609\" is used to protect the \"iron anchor 609\" to ensure the sealing of the pipe, and each single machine and pipe are connected to the ground wire and grounded to avoid dust explosion caused by electrostatic sparks. Before each stand-alone trial operation, check whether there is a metal item in the machine, if there is an exclusion. Whether the bolt is firm and the tightness of the belt, the reliability of the shield, and the like. After five minutes of empty bus, the operator should carefully observe the various instruments on the control cabinet, and they can be pushed. After the feed, the current is not allowed to exceed the rated value of 32.6A, otherwise it should be subtracted to ensure that the normal operation of the discharge is fixed. The stepless shift handle of the classifier can change the speed of the hierarchy, and achieve the excellent adjustment of the product. If the product particle size is required, the speed can be improved, and the rotational speed is reduced, and large particle size particles can be reduced.
The above is that the user receives the normal acceptance operation process after the Air Classifier of Iron Ore Powder product, you can try to identify the use
A industrial company's main business scope is: new energy storage materials, electronic ceramic materials technology and industries, secondary resource re-production new technology and industry, biological engineering and organic polymer materials, electronic products and network products technology development, Technical transfer, technical training; products and related materials and equipment after manufacturing, sales; international technical cooperation and related field trade, technical personnel training , Zero accessories, original auxiliary materials and technology import and export business.
Case parameters:
Product particle size: D50: 5.8UM
Hour Yield: 800kg
Welcome to inquire!
