With the rapid growth of China, high-energy mining machinery industry, especially Steam Jet Mill for Crystal (Ink Type) will have a huge development space, and various mineral powder products will develop rapidly. In order to ensure sustainable development of the entire mineral powder industry, green, environmentally friendly, healthy fluidized bed Jet Mills and products are more extensive. When applied to people's lives, it is necessary to optimize the use of equipment technology.
Steam Jet Mill for Crystal (Ink Type) equipment requires integration of equipment and technology research and development. Since the ultrafine powder grinding equipment must be adapted to specific material characteristics and product indicators, their specifications and models are varied, so there is no ultrafine powder grinding and grading equipment for any material.
Although China's crusher manufacturers are numerous, the overall R \u0026 D capability is weak, low product technology, and does not meet the application needs of high-end powder metallurgical equipment in the downstream field, and severely constrain China's crushing equipment development, with domestic manufacturers R \u0026 D The continuous investment and technology breakthroughs, domestic crushing equipment is expected to occupy greater share in the global market.
Steam Jet Mill for Crystal (Ink Type) is widely used, do you know how to use it correctly? The following content hopes to help you.
1. Preparation before departure. Check if the host, connector, pipeline, and the valve are normal, working properly. 2, open the machine
(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.
(2) From zero, gradually adjust to the specified speed.
(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the sequence of stops:
inverter-feeder-main air valve-compressor-grade impeller-motor cyclone material, dust removal switch-fan-main power supply-air compressor .
4, Maintenance
(1) The motor should be lubed regularly, but the lubricant should not excessively avoid the bearing temperature too high.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag, it should be cleaned or replaced.
5. Precautions
(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
ALPA Pea Protein Steam Jet Mill for Crystal (Ink Type) Case Sharing: This customer is a food company in Russia. After finding a lot of powder equipment companies, it does not find a suitable device. It has been affected the company's production and operation, and finally I saw the ultra-fine pulverization of pea protein before our website. Finally, through the incoming experiment, I finally determined the purchase of the Steam Jet Mill for Crystal (Ink Type) of our company.
Technical parameters:
Finished particle size: 400 mesh
Production capacity: 1.5T
The above is the use of STEAM JET MILL for Crystal (Ink Type). Matters, friends who want to know other crushers can pay more attention to us!
