Jet Mill of PE Wax

Many friends who want to produce industrialized must be unfamiliar with Jet Mill of Pe Wax. Jet Mill of Pe Wax has the characteristics of convenient, fast pulverity, and crushing product quality. It is a very useful pulverizer. .

JET MILL OF PE WAX is applied to the ultrafine pulverization of the material. After the material is extracted, the properties of the powder will have a large change in the properties of the powder, and it appears high viscosity after being affected. Powder is extremely prone to aggregation in the feed opening, pulverizing cavity and exhaust pipe, requires special treatment processes and specific design. Shan dong alpa design-developed material smashed hit in the crushing of materials.

JET MILL OF PE WAX Compressed Gased The high-speed jet produced by the feed nozzle The material particles in the bucket are introduced into the disc shocking chamber 3, and several jet nozzles are provided around the crushing chamber. The high-speed fluid is injected in the direction, producing an ultra-high-speed swirling in the pulverizing chamber. The coarse particles in the opposite ultra-high-speed swirls in the superiospantial cyclone generate hit and friction in the intersection, and the particles were quickly pulverized. When the particles are pulverized to the fractional particle size below the fractional particle size, the centrifugal force of the particle movement is reduced, and the grading swirling is separated from the center outlet under action, and is collected from the center outlet. Such a pulverizer, the motion of the particles can be decomposed into two components in both directions. In one direction, the direction of movement of the particles is substantially consistent, and there is no significant impact pulverizing effect, and only in the other direction, the particles are opposite, and the particles produce effective impact. Therefore, this impact of the intersection is limited, and the energy of ultra-high-speed moving particles has not been fully utilized, so the production energy consumption is still high.
What are the characteristics of Jet Mill of pe WAX? Xiaobian is to analyze the characteristics it has.
1. This micro-jet classifier is mainly designed for the research and development department of universities and research institutes and the enterprise;

2, its volume is very small and easy to move, in the crushing space is not very spacious, use This classifier is very convenient; of course, according to the actual situation.

3, the sample loss in the classifier is very small, and the grading of a small amount of valuable sample is very suitable.

In general, there are some sounds in the operation. Jet Mill of PE Wax will have broken sounds when crushing the raw material, which is normal. However, if the sound turns a noise, if the sound becomes too loud, it will become a problem. So how do I solve the phenomenon of excessive noise? Let's take a look at it.
1. Add a lubricating oil on the rotating part, and adjust the bearing if the bearing and the shaft are; if the bearing wear is resistant, the bearing will be replaced.

2. During the pulverization processWill produce noise.The cooling sleeve is dispensed in the crushing chamber, which can be used to reduce the temperature.

3. Install the muffler on the fireplace of the pulverizer.
4. Damping equipment, such as using damping boards.


ALPA Water Available Feni50Jet Mill of PE Wax Case Sharing: The customer needs a device that can make ultrafine pulverized metal powder.Finally, we purchased our AlPA CSM710-V mechanical grinder.
Technical parameters:

Production capacity: 200-250kg

For more consultation, please continue to pay attention to us, or inquire.