In this economically flourished area, many people know that Steam Jet Mill Crusher Of Biskuth Oxide, crusher technology is in a leading position in the same industry.
Steam Jet Mill Crusher Of Bismuth Oxide is used to crush the item, then the crushing items and tailings will also be discharged in time. When the crusher discharges these crushing items, there will be dust. Phenomenon. How do I solve if the dust is too big?
1. Install the dust collector: Generally, this dust collector can now be used with a crusher. It puts dust income trapping bag, dust is filtered by the dust box;
2, cloth bag dustproof: cloth bag is tightly pulled with machine, prevent leakage drain. Attention should be paid attention to parking, and the dust should be cleaned in time.
3, woodllar or pool dust removal: mainly using the ventilator to vacuum to the crushing, then vacuum, or vacuum through the pool.
The above three dust removal methods can achieve a good dust removal effect, and can solve the problem of excessive dust, which is generally installed before working to prevent excessive dust.
Steam Jet Mill Crusher Of Bismuth Oxide Working Principle:
The power of the machine uses purification and dry compressed air. The compressed air is sprayed into the crushing chamber at high speeds of special supersonic nozzles. The airflow has a high-speed movement of the material, resulting in a strong collision, friction and shear between materials and materials, thereby achieving breaking. Outlet, enter the collection system. The pulverized material rises into the classification chamber to meet the particle size required by the granularity, and the particles do not reach the particle size required to continue pulverization. The entire production process is fully closed, continuous operation, no dust pollution, purified by dust removal, filtration.
Steam Jet Mill Crusher Of Bismuth Oxide Temperature High Solution
1. Make sure the quality of the pulverizer grinding disc is not harmful: to carry out the grinding tray that is replaced Real-time monitoring system, immediately observe the harm of grinding disc for intake system.
2. The grease oil does not meet the regulations: Analysis of the grease on time on time, ensuring that the grease oil exceeds the remarks.
3. The refrigeration system does not have a cooling effect: the cooling tower of the intake system is used to use a water cooler to use the continuous liquidity cooling circulating water to grease the heat production. When driving, when driving, touch the cooling tower with hand Oil pipe, I found that the temperature difference is small, I can't feel, I can see the singleThe effect of the cooling tower is not obvious. The heat exchange time of the cooling circulating water and the grease is too short, and one cooling tower is connected in series in the cooling tower, and the double cooling tower is refrigerated, and the heat exchange time is extended.
AlPa Chicken STEAM JET MIL CRUSHER OF BISMUTH OXIDE Case Share: The company is a company, the company needs to smash a chicken protein, asking several powder equipment companies in Europe,There is no suitable equipment.Later, I learned that our ALPA, the testism sent us a message, and we didn't know if it was received after receiving the email.But our ALPA still decided to try it, and then let the customer maidens will be experimentally.Through multiple experiments, we have identified a crushing equipment that meet the particle size needs of the company.Finally, the company also purchases the series of equipment.
Technical parameters:
finished particle size: 100μm
Production capacity: 500kg
Welcome everyone to continue to pay attention to our website to learn more!
