Steam Jet Mill Grinder of Hardener is good, only need to be produced in a smooth ground place, and low noise, which can avoid dust leakage during the pulverization process, which is favored by the powder industry.
The distinction between the ultrafine pulverizer and the ordinary pulverizer in the crush:
The ordinary pulverizer can only be smashed into 200 mesh, and 200 mesh is 75 microns. It is the size of the flour, and the ordinary flour is about 80 mesh 160 mes, that is, 90 to 180 microns, this is the thickness of the ordinary pulverizer to print powder.
The ultrafine pulverizer can be super micro-pulverized, can be smashed to 10,000 mesh, 10,000 mesh is 1.3μm, which is equivalent to the particles of the flour, and then pulverized into 70 copies, each size is 10,000 mesh, can It is very thin.
The qualified fine powder is delivered to the hierarchy of the upper portion of the pulverizer through the rising airflow. The classifier classifies the qualified materials and enters the cyclone collector (if a product having several particle size is required, add a plurality of vertical turbine classifiers). Fine tails are delivered into the bag dust collector via airflow. After filtration, the tail enters the exit of the lower part of the filter and empty the air.
Native components: classifier, grinding, grading, synchronous completion, to adjust the speed of the classifier through the frequency conversion speed, can adjust the fineness of the product. For example, if a machining process requires a number of particle size sections of the product, then two to four can be increased on the basis of a standard classifier, so that the machine becomes the \"two five\" machines of pulverization and grading.
How to install Steam Jet Mill Grinder of Harden, the following content hopes to help you.
1, Chinese medicine shredder should be more smooth and easier to use.
3, before the machine is opened, check whether the components of the machine are firm and reliable. Everything is normal, so you can work.
4, turn on the power supply, turn for 1-2 minutes, check whether the operation is normal, normal conditions, can put the material. When the crusher is working, the operator cannot leave. Once the sound is abnormal, the power supply should be disconnected immediately. In the new pulverizer raw material, the exit is fixed with a long bag.
5. When using the pulverizer, if the power supply voltage is too low, do not use it to avoid damage to the motor. The power supply is normal, it is not easy to damage, and the production efficiency is high.
Alpa Seaweed Feed Steam JEt Mill Grinder of Hardener case share: The company is a seafarer enterprise in Yantai. It has been found to be pulverized to seaweed during breeding. After pulverization, it can be used as a feed purchase cost.By comparing the long-term use of a Steam Jet Mill Grinder of Harden, it is possible to purchase the feed for a few years. The cost of the production line can save.The company purchased our ALPA Steam Jet Mill Grinder of Hardener.
Technical parameters:
Finished granularity: D90: 400 目
ALPA technology research and development crushing equipment has been applied in many actual engineering cases, Provide basic information for objective understanding of jet grading technology.
