With the continuous development of pulverizer technology, Steam Jet Mill Crusher Of Kelp has gradually penetrated into everyday life.
Steam Jet Mill Crusher Of Kelp is installed in a place where the site is flat. Pick the processed material before work, no metal, stone, etc. hard substances are mixed into the machine, so as not to damage the parts or failures in the machine. Check that each component is firm and reliable before booting. Everything is normal, the side can turn on the power, idle for 1-2 minutes, check whether the operation is normal, everything is normal, it can be pushed. When working, the operator cannot leave. Once the sound is abnormal, the power should be disconnected immediately. When machining raw new friends Chinese medicine crusher, the discharge opening should be tied to the bag. When the pulverizer is in use, if you encounter the power supply voltage, do not use it, so as not to damage the motor. When the power supply voltage is normal, the machine is not easily damaged, and the production efficiency is high.Steam Jet Mill Crusher Of Kelp Principles: When the compressed gas enters the pulverizer by the feeder, the pulverized raw material enters the pulverization room, there are multiple pulverized nozzles per circumscribed, and the supersonic air flow is injected, so that the material is high-speed The impact and the material collide with each other, friction and pulverize, the grading tube separates the thicker particles, the crude particles continue to be pulverized, and after the internal closed circuit is pulverized, ultrafine powder can be obtained in the discharge port. 1. Suitable for dry ultrafoil. Due to the large impact speed, it can reach 2.5 Mach or more. It is easy to obtain 1-10 micron particles, depending on the material properties, it is possible to obtain less than 1 micron particles. 2. Because there is a closed-circuit classification mechanism inside the pulverizer, the product is thick The particles are constantly pulverizing, and therefore the particles are uniform, small particle size distribution ranges are obtained. 3, the device has short-striped time, simple structure, convenient operation, small area, low noise (72 decibel) and no vibration. 4, the efficiency of the pulverization is high, which can be pulverized, and the purity of the pulverized article can be maintained.
Steam Jet Mill Crusher Of Kelp It is necessary to clean the air pulverizer after long-term use. After cleaning the pulverizer, all machines must be removed. Detaching skill is also very good. When cleaning, the power supply can be turned off, and the remaining dust can be removed directly with a brush. We must remember to clean it layer by layer. When the displacement is removed, four screws on the base can be removed, and then remove the hopper. When the screen is removed, the airflow pulverizer door can be opened directly and the screen can be removed at the end. After the mobile gear is removed, the fastening nut is released first, and then the live teeth are separated from the spindle. Then move the mobile gear and put it safely. Remove the fixed gear, remove the screw and remove the fixed gear. Be careful when disassembling the gas flow crusher. Do not cause any damage to the components of the machine itself.
AlPa Quartz Powder Steam Jet Mill Crusher Of Kelp Case Sharing:
A silicon material company main business scope includes: quartz, 坩 waste processing, production; silicon fine powder, square stone, molten stone, quartz sand, kaolin, Flame retardant sales; self-operated and proxy products and technical import and export business Case parameters:
Product particle size: D97: 5-75UM
Hour Yield: 20-100kg
The company has consistently follows the standard management, puts the quality in front of the production and service policy, and provides products and services to our customers with confidence with the weighing airflow.
