Jet Mill Grinder Of Atopril is well balanced, only need to be produced in a smooth floor placement, and low noise, which can avoid dust leakage during the pulverization process, which is favored by the powder industry.
Jet Mill Grinder of Atopril has several types: airflow mill, fluidized bed flame mill, circulating tube gas flow grinding, jet gas flow mill and target gas flow grinding. The main performance characteristics of the pulverizer:
1, the airflow pulverizer includes a vertical hierarchy device. The size of the product can be adjusted between D97: 8 and 150 microns, with a good particle shape and a narrow particle size distribution. It can be used in series with multi-stage classifiers and produces a product having multiple particles.
2, the airflow pulverizer is easy to disassemble, the inner wall is smooth, no dead angle. The whole system is closed, the dust is small, low noise, and the production process is clean and environmentally friendly.
3, the airflow pulverizer control system adopts program control, easy to operate.
The following describes the working principle of Jet Mill Grinder Of atopril devices:
L, the hierarchical device uses the attachment of the radio to make the inertial force, centrifugal force, and suspension force to design into a novelty. Ultrafine jet classifier. The grading machine reaches high precision, and can be graded, medium and fine powder three levels of products.
2, the jet classifier does not have any moving parts, and only high pressure air is working medium. Reliability for the classifier host, maintenance and maintenance is convenient. The adjustment of grading granularity is also very convenient, and only the flow meter and several gate valves disposed on the machine can be convenient to adjust the grading particle size.
In order to let everyone have a further understanding of Jet Mill Grinder Of Atopril, the following simply analyze the common problems and how to solve these problems.
1, ask: How to choose equipment in the face of materials that need to be smashed?
A: (1) Moh's hardness is less than 3. The mechanical grinding machine and hierarchical impact mill can meet the crushing requirements, saving a certain cost. (2) High hardness, high purity material is higher than 3.5 hardness. (3) If it is a metal powder, you can atomize the grading and cannot be broken.
A: (1) After the food and drug is crushing, it is necessary to meet the level of food safety, the best choice for stainless steel materials, because the mirror is polished inside and outside, does not produce iron pollution. (2) Broken material is easy to worn, and the purity is required to be high after crushing, and the stainless steel is optimal. (3) If the crushing requirements are not high, cost savings, the air pulverizer of carbon steel material can be used.
3, ask: When using air flow powderWhen the shredder, the fineness of the finished product does not meet the standard, how is it to adjust the classification wheel?
A: (1) If the new custom pulverizer does not meet the requirements of the granularity, the device can be incorrect.
Therefore, in order to avoid such errors, it is best to perform material crushing and grading experiments before purchase, and carefully check whether the experimental results are satisfactory.
ALPA Potassium Sulfate Jet Mill Grinder of Atopril Case Sharing: This customer is a Saudi company, which needs to be graded on potassium sulphate, and investigate the international powder equipment company, and finally chose our alpa.Grading machine equipment.
Shan Dong Alpa is a scientific and technological private enterprise producing various airflow pulverities, airflow mills, disc gap pulverities, disc air crushers.
