Because Jet Mill Crusher of Charcoal Powder is widely used in all walks of life, research and development of classifying machines at home and abroad pays great attention. In the current market, there is a great development space.
Jet Mill Crusher of Charcoal Powder has a wide range of pulverized granularities, simple and convenient, but during the pulverization process, there is often a case where the crushing effect is different.
The crushing effect is mainly affected by the following factors:
The temperature and pressure of the gas ratio, the feed particle size, the working fluid, and the pulverization aid. The gas-solid ratio of the pulverizer in crush is an important technical parameter and an important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. But if the gas is too high, not only will waste energy, but will even degrade the dispersion performance of certain pigments. When pulverizing hard materials, there is a stricter requirement for the particle size of the feed. In terms of titanium powder, it is necessary to control 100 to 200 mesh when pulverizing calcination; the material after pulverizing surface is generally 40 to 70 mesh, and cannot exceed 2 to 5 mesh. So, should you choose how high pressure when crushing? Those skilled, this is mainly dependent on the comminutability and fineness requirements of the material.
1. Open the switch in the control cabinet, start the power supply, equipment operation;
2, the raw material enters the feeder
3, the raw material enters the feeder injector in the feeder
4, the raw material reaches the hierarchical body after special dispersion, grading through physical effects such as airflow and gravity;
5, the airflow of the three flow paths has the control valve group adjustment to maintain their respective balance;
6, grading The rear coarse fine product is recovered separately;
7, clean air is discharged into the atmosphere.
Select Jet Mill Crusher's CHARCOAL POWDER Lubricant products to select the type and label of the lubricant according to the instructions on the device manual. Generally, Jet Mill Crusher's CHARCOAL POWDER equipment manufacturer's production and use of lubricants is very clear. This requires we choose in actual work. According to the work conditions of the equipment. For machines with higher temperatures, high viscosity oils, ensure the thickness of grease under normal operating conditions, and ensureLubricants can flow smoothly in low temperature environments; when the mechanical operation is high, select viscosity. Smaller oil ensures good permeability and fluidity. If the grease is too thick at this time, it will increase the operational resistance. When the load is relatively large, the oil having a slightly high viscosity should be used to ensure the thickness of the grease.
When purchasing Jet Mill Crusher's CHARCOAL POWDER lubricants, they should help their physical properties and chemical properties such as viscosity, flash point, corrosion resistance, etc., but also combined with manufacturers, considering comprehensive benefits and Under the premise of management benefits, minimize the type and quantity of oils as much as possible to reduce financial costs. The storage of lubricants and storage of oil plays an important role in the performance of the oil. When the lubricating oil is in contact with the non-ferrous metal, it will oxidize, which affects its performance, and corrosion during use, causing damage to the machine. Therefore, in the storage process, it should be avoided in contact with copper. The barrel oil should be kept cleaned and ventilated, protected from light. The storage time of lubricating oil should not be too long to avoid deterioration.
The above is Jet Mill Crusher of Charcoal Powder manufacturer's knowledge brought by the dispensing of the lubricant
AlPa Precipitated Sulfate Jet Mill Crusher of Charcoal Powder case Sharing: Shenzhen Chemical Raw Materials requires multiple large production and low particle size precipitated sulfate crushing production lines. Our AlPA is a large enterprise in the powder equipment industry, and our equipment is customized. Different companies are used to meet different needs of different companies. In response to the needs of the company, our company customized five Jet Mill Crusher's production lines to meet the product needs of the customer.
Technical parameters:
Production capacity: 4.5 +/- 10% / T
To learn more about Jet Mill Crusher of Charcoal Powder's knowledge is to Shan Dong Alpa, the company is in the development and production of crusher and crusher related products, quality multiplication, and is trustworthy.
