Jet Mills of Zirconium Diboride is better, only need to be produced in a smooth ground place, and low noise, which can avoid dust leakage during the pulverization process, which is favored by the powder industry.
Jet Mills of Zirconium Diboride's temperature is also a factor affecting work efficiency. When the temperature of the working fluid is too high, the flow rate of the gas increases. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.What is the characteristics of Jet Mills of Zirconium Diboride? Xiaobian to analyze the features it has.
1. This micro-jet classifier is mainly designed for the research and development department of universities and research institutes and the enterprise; 2, its volume is very small and easy to move, in the crushing space is not very spacious, use This classifier is very convenient; of course, according to the actual situation.
3, the sample loss in the classifier is very small, and the grading of a small amount of valuable sample is very suitable.
How to install Jet Mills of Zirconium Diboride, the following content hopes to help you.
2, before the traditional Chinese grinder work, clean processing materials must be selected. Hard metal, such as metal or stones, can not be mixed into the machine, so as not to damage parts or faults.
3, before the machine is opened, check whether the components of the machine are firm and reliable. Everything is normal, so you can work.
4, turn on the power supply, turn for 1-2 minutes, check whether the operation is normal, normal conditions, can put the material. When the crusher is working, the operator cannot leave. Once the sound is abnormal, the power supply should be disconnected immediately. In the new pulverizer raw material, the exit is fixed with a long bag.
5. When using the pulverizer, if the power supply voltage is too low, do not use it to avoid damage to the motor. The power supply is normal, it is not easy to damage, and the production efficiency is high.
AlPa Cassava Starch Jet Mills of Zirconium Diboride Case Sharing: This customer is a new panel industry, dedicated to providing specialized for the plywood industry customersNew packing of plywood, quality, high quality.The company needs to be used in the production process of the company.Multi-party examine, finally purchased the CSM1100-V mechanical grinder from our AlPa.
finished particle size: 98% over 325 mesh
Production capacity: 2T
Today Jet Mills of Zirconium Diboride's knowledge, I will introduce you to here, thinkFor more information, please continue to pay attention to our website.
