The people currently used in daily life are also more, the airflow pulverizer is smashed into the standard size, which is generally smashed into micrometers, usually our equipment is more The device is constructed, usually composed of a portion of a coarse, fine powder or a wind device, or the like. The main purpose is to use wind energy to be powdered, and have canceled the traditional screening at the time of use. The main application is more useful in many industries such as mining or building materials. Some industries such as metallurgical or building materials, chemicals, etc. are useful to use large crushers for work.
Jet Mill Pulverizer of Inorganic Minerals is mainly used for more refined materials. The graded particle diameter is 1.5 to 0.005 mm, and the crude material is sieved. The principle of pulverization is substantially the same as the hydraulic level, and the above settlement theory can also be used for airflow classification. However, in the airflow classification, since the density and viscosity of the air are much smaller than the density and viscosity of water, the same particles are more settle more in the air than in the water. Moreover, the density and viscosity of the air varies with temperature and pressure.
In order to cause air flow, wind grading equipment typically requires an appropriate fan (exhaust or blast).
When the airflow is classified, the fine particles are typically taken away by the airflow. In some cases, the feedstock is sent together with the airflow into a grading device. It is well known that the load of solid particles in the air under normal pressure does not exceed 500 g / m3 air. When it reaches 1 kg / m3, the particles fall from the airflow. The load is related to the density and particle size of the particles. When the fine particle material is treated, the load generally does not exceed 200 to 300 g / 3 air. According to this calculation, the volume concentration of the solid in the gas stream is much smaller than 0.03. Therefore, when the airflow is classified, in most cases, it belongs to the free settlement.
The speed required to move the particulate material in the horizontal and vertical directions is relatively large, and the speed required in the horizontal direction is relatively large, and as the particle density increases, for example, for the density 1.5 of the pulverization coal per centimeter. The minimum wind speed is 2 m / sec; a powder material having a density of 2.5 g / cm, the speed is not less than 3.5 m / sec; a powder having a density of 4 g / cm 3, a minimum speed of 4 meters per second. Due to the complexity of the situation, the appropriate airflow rate in each particular situation should be determined by experiments.
In the rising airflow, the gas flow rate required to suspend the particles having a certain density and particle size is greater than the calculated value of the free settling, which is due to the uneven distribution of the airflow along the hierarchical chamber portion.
The Jet Mill Pulverizer of Inorganic Minerals has a wide range of grading, high grading efficiency, high leveling accuracyThe cutting particle size is accurate and stable.
Jet Mill Pulverizer of Inorganic Minerals Scope: The grinding mechanism of the machine determines that its application is wide, and the fine finished product is high. Typical materials are: super hard diamond, silicon carbide, metal powder, high purity requirements: ceramic pigment, medicine, biochemical, low temperature requirements: medicine, PVC.
How do I solve the problem of Jet Mill Pulverizer of Inorganic Minerals? Let's take a look.
2. There is also noise during the pulverization. The cooling sleeve can be used to reduce the temperature, which can allocate water in the crushing chamber.
3. Install a muffler on the fireplace of the crushing room. 4. Resistance equipment, such as using damping boards.
ALPA modified quartz, silicon fine powder Jet Mill Pulverizer of Inorganic Minerals case share:
A material company is a research and development of special products engaged in inorganic non-metallic powder materials and surface treatment. High-tech enterprises that serve production, sales and technology services.
The company has a series of automated production equipment and testing instruments such as fine grinding, precision grading, and surface cover to compound mixing; high purification, ultrafine, sphericalization, and Its surface coating treatment is deeply processed, whether it is a formulation optimization or a custom research and development of new products.
Case parameters
Hours Yield: 3-10kg
AlPa is a power classifier, precision classifier, laboratory grade machine and other equipment Producers, we have years of production experience in the production of products, and we have achieved a lot of important breakthroughs in many mechanical products, and believe that it will be the primary choice for your product purchase.
