Steam Jet Mill of Zirconium Silicate is good, only need to be produced in a smooth ground place, and low noise, which can avoid dust leakage during the pulverization process, which is favored by the powder industry.
Steam Jet Mill of Zirconium Silicate Main Performance Features:
1, which contains vertical hierarchical devices, product size D97: 8 150 microns adjustable, granular shape, narrow particle size distribution . It can be used in series with multi-stage classifiers, or producing multiple granular products at a time.
2, this device is disassembled and cleaning, the inner wall is smooth, and there is no dead angle. The entire system is closed, less dust, low noise, clean and hygiene production process.
3, the control system uses program control and easy operation.
Steam Jet Mill of Zirconium Silicate works by a grace machine, a cyclone separator, a dust collector, and a veneer. Under the pulverizing fan puller, the lower end of the gas pulverizer is moved upward to the hierarchical region, and the thickness and fine product are separated from the strong center of effort to the high-speed rotation grade turbine. The cyclonic separator or dust collector is collected by the grading wheel, and fine particles required to meet the particle size are collected, and the coarse particles are collected. The velocity of the entrained fine particles disappears and falls along the two towers of the cylinder wall. The crude particles and fine particles are separated by strong purification of the two winds, and the fine particles rises twice as the grade region, and the crude particles drops to the discharge port.
Steam Jet Mill of Zirconium Silicate has many core accessories, and these attachments are also fragile parts. Once they don't pay attention to maintenance, it will cause serious consequences, especially if the airflow grinding spindle will cause downtime, and cannot estimate the output. Loss, the following sections describe the reasons for the fracture of the airflow grinding main axis.
1. Since the pulverizer is a long-time crushing and ground bulk ore, the mechanical impact will cause fatigue damage to the spindle, if it is operated, the surface of the spindle Will wear, if you don't pay attention, cracks are generated.
2. The air supply will pass the airflower overload. When gas flow is used, you need to feed it properly, and each machine is limited. If this is exceeded, the component is easily damaged in the load operation, which will affect the overall service life of the airflow. 3. During mining and transportation, ore is often mixed with some waste metals. When these objects are in electromagnets at the upper portion of the belt, the electromagnet cannot be Exclude, causing these materialsIn the ore and mud, it is included in gas flow mill, resulting in frequent iron, resulting in frequent impact on the spindle and other parts.
The above is why Steam Jet Mill of Zirconium Silicate spindles are easily damaged.
ALPA Peel Pea Steam Jet Mill of Zirconium Silicate Case Sharing: The company uses the food professional processing enterprises in R \u0026 D, processing, and sales, and has been discovered by multi-examination or our AlPa Steam Jet Mill of Zirconium.Silicate meets all needs.
Technical parameters:
Production capacity: 2T +/- 10%
Shan dong Alpa is a scientific and technological private camp to produce various airflow pulverations, integrating development, manufacturing and applicationenterprise.The main product model has airflow pulverizer, airflow mill, pharmaceutical gas flow pulverizer, disc air pulverizer, eddy current pulverizer.
