Since Steam Jet Mill Machine for Metal Strip is widely used in all walks of life, the research and development of classified machines at home and abroad pays great attention. In the current market, there is a great development space.
Steam Jet Mill Machine for Metal Strip is used to crush the item, then the crushing items and tailings should also be discharged in time. When the pulverizer discharges these crushing items, there will be dust. Phenomenon. How do I solve if the dust is too big?
1. Install the dust collector: Generally, this dust collector can now be used with a crusher. It puts dust income trapping bag, dust is filtered by the dust box;
2, cloth bag dustproof: cloth bag is tightly pulled with machine, prevent leakage drain. Attention should be paid attention to parking, and the dust should be cleaned in time.
3, woodllar or pool dust removal: mainly using the ventilator to vacuum to the crushing, then vacuum, or vacuum through the pool.
The above three dust removal methods can achieve a good dust removal effect, and can solve the problem of excessive dust, which is generally installed before working to prevent excessive dust.
Steam Jet Mill Machine for Metal Strip features:
1. High yield, low energy consumption, high grading efficiency.
3. The structure is reasonable, and 1-6 kinds of products can be produced simultaneously according to user requirements.
4. Strong applicability: Can form closed or open joint operations with various mill (air mill, mechanical mill, ball mill, thundering machine, vibrating mill, etc.).
5. High degree of automation.
Do you know how to use Steam Jet Mill Machine for Metal Strip? I hope the content below can help you.
1. Preparation before the pulverizer is started to check whether the host, joint, pipeline, and the valve are normal and working properly.
2, open the pulverizer
(1) Open the compressor power supply, dustpress pressure valve and the main air valve, open the power switch of the pulverizer, turn on the power switch.
(2) From zero, gradually adjust to the specified speed.
(3) Open the fan, cyclone separator, dust removal and charger power, open the total power box, set the frequency of the inverter, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, pulverizer shutdown sequence is: inverter - feeder - main valve compressor - Compressive plane impeller motor - cyclone material, dust removal switch - fan - General power supply air compressor.
4, eddy current pulverizer maintenance and maintenance
(1) Periodically lubricate the eddy current pulverizer, but the lubricating oil should not be too large to prevent too high of the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag is filtered, it should be cleaned or replaced.
5, eddy current pulverizer precautions
(1) When the device is running, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller should not exceed the specified requirements, otherwise the temperature is too high, the impeller and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
ALPA carbonate Steam Jet Mill Machine for Metal Strip case sharing:
a lithium industry company is a new energy high-tech enterprise that extracts the preparation of lithium battery positive electrode raw materials - battery grade carbonate. The main product of sodium sulfate, battery-grade carbonate, and other products of industrial grade carbonate. The company has passed the certification of the Quality Management System, \"Environmental Management System\", ISO50001 \"Energy Management System\".
Case parameters:
Product particle size: D50: 5.5μm
Hour Yield: 900kg
Welcome to inquire!
