Jet Mill Grinder for Sorbitol is mainly used by the pulverization mechanism to determine its application range, high finished product, widely used in chemical, minerals, metallurgy, abrasives, ceramics, refractories, pharmaceuticals, pesticides, food, health care. Products, new materials and other industries.
What is the design structure of JET MIINDER for Sorbitol?
Under the action of the high-speed rotary impeller, the gas pressure flowing through the impeller increases, and the high pressure airflow flows out of the impeller, the fine particles are ejected. Since the blade of the rotary vane is designed as a bending, the inlet is large, the exit cross-sectional area is small, so the airflow pressure at the outlet is reduced, the speed increases, and the rotational flow is conducive to classification.
The grading point adjustment mechanism sets three adjustment rods and keeps its synchronous motion using the chain. When the adjustment rod moves up, the fine powder increases; when the adjustment rod moves down, the fine powder is reduced. The graded point can be continuously adjusted, and the grade of Jet Mill Grinder for Sorbitol can be adjusted. The gradular weight product can reach D97 ≤ 3 ≤ 150 microns, suitable for fine grading of dry micrometer products.
The setting of the control ring is to ensure that the control ring is formed between the control ring and the radial particles ring, and the stability of the airflow flow is controlled. The residual windlet inevitably introduces excess gas from the dry material, the temperature of the classification chamber is high, and the air can expand, and therefore designed a residual tightening to maintain the stability and balance of the graded indoor airflow.
Jet Mill Grinder for Sorbitol Working Principle:
After entering the hierarchy, the distribution disc on the discharge wheel is uniformly Assign and thrown into the ring, fall into the grading area.
The graded air enters the spiral wind chamber, through the guide disk blade flows into the grading wheel in the center direction, and the fine powder satisfying the particle size is separated under grade gravity. Fine powder flows at high speeds and enters the fine powder trapping system from the grading air and then separated from the grading air. The coarse powder falls into the lower part of the graded machine.
After long-term use, it is necessary to clean Jet Mill Grinder for Sorbitol. Before the airflow pulverizer is cleaned, all machines should be disassembled. When cleaning, the power supply can be turned off, and the remaining dust can be removed directly with a brush. We must remember to clean it layer by layer. When the displacement is unloading, you can remove the four screws on the base, then remove the hopper. When sieved, the air pulverizer door can be opened directly, and finally the screen can be disassembled. After removing the movement gear, release the fastening nut first, then separate the live teeth from the spindle. Then removeThe next active gear is safely placed.Remove the fixed gear, remove the screw and remove the fixed gear.Be careful when disassembling the air pulverizer and must never be damaged by machine components.
ALPA Water Glucose Media Jet Mill Grinder for Sorbitol Case Sharing: A starch sugar is needed to take a dispelling equipment for water glucose media, and many powder companies have not found appropriate.equipment.We have found appropriate equipment in our AlPA.Our Jet Mill Grinder for Sorbitol can disperse the water glucose medium.
Technical parameters:
The equipment market is rapidly changed, and the current airflow classifier has certain demand in the market, but societyConstantly developing, no matter what industry needs to keep paying with the times, it can lead the industry.
