Steam Jet Mill Machine of Iron Diboride

With the continuous increase in society, Steam Jet Mill Machine of Iron Diboride is constantly improving in terms of performance, finished product quality, service life, etc., very well, which is well processed into microtes and even nanoscale fine powder, and has already A wide range of applications in many areas such as chemical, food, pesticides, cosmetics, dyes, coatings, and electrons.

Steam Jet Mill Machine of Iron Diboride is transformed into a high-pressure air flow as a pulverized kinetic energy to a pulverizing cavity, which is a gas flow distribution station. The airflow passes through the Ravar nozzle accelerates supersonic airflow into the pulverizing chamber. After that, the material and the venturi nozzle enters the crushing chamber synchronous acceleration grind. The acute angle of the Ravar nozzle is mounted, so the flow cycle of the crushing cavity and the animal feed, the particles are hit, collide, friction, and grind each other. The fine particles were opened into the center of the pulverizer, and the cyclone separator was entered at the drive of the heart flow, and the coarse powder was thrown into the periphery of the pulverizing chamber, and cycled under the action of centrifugation and continued to be pulverized.

Steam Jet Mill Machine of Iron Diboride Working Principle:

The qualified fine powder is delivered into the hierarchy of the upper portion of the pulverizer through the rising airflow. The classifier classifies the qualified materials and enters the cyclone collector (if a product having several particle size is required, add a plurality of vertical turbine classifiers). Fine tails are delivered into the bag dust collector via airflow. After filtration, the tail enters the exit of the lower part of the filter and empty the air.

Native components: classifier, grinding, grading, synchronous completion, to adjust the speed of the classifier through the frequency conversion speed, can adjust the fineness of the product. For example, if a machining process requires a number of particle size sections of the product, then two to four can be increased on the basis of a standard classifier, so that the machine becomes the \"two five\" machines of pulverization and grading.

Let's learn the knowledge of Steam Jet Mill Machine of Iron Diboride lubricants.

Selecting Steam Jet Mill Machine of Iron Diboride Lubricants to select the type and label of the lubricant according to the instructions on the device manual. General STEAM JET MILL MACHINE OF Iron Diboride equipment manufacturer's production and use of lubricants is very clear. This requires we choose in actual work. According to the work conditions of the equipment. For machines with high friction, high viscosity oils, ensure the thickness of grease under normal operating conditions, and ensure that the lubricant can be capable ofCool flow; when the mechanical work rate is high, select the viscosity. Smaller oil ensures good permeability and fluidity. If the grease is too thick at this time, it will increase the operational resistance. When the load is relatively large, the oil having a slightly high viscosity should be used to ensure the thickness of the grease.

When purchasing Steam Jet Mill Machine of Iron Diboride lubricants, they should help their physical properties and chemical properties, such as viscosity, flash point, corrosion resistance, etc., but also combined with manufacturers, considering comprehensive benefits. Under the premise of management benefits, minimize the type and quantity of oil to reduce financial costs. The storage of lubricants and storage of oil plays an important role in the performance of the oil. When the lubricating oil is in contact with the non-ferrous metal, it will oxidize, which affects its performance, and corrosion during use, causing damage to the machine. Therefore, in the storage process, it should be avoided in contact with copper. The barrel oil should be kept cleaned and ventilated, protected from light. The storage time of lubricating oil should not be too long to avoid deterioration.

The above is the knowledge of the STEAM JET MILL MACHINE OF Iron Diboride manufacturer to buy the kids of the lubricant

AlPa Soda Steam Jet Mill Machine of Iron Diboride case Share: The company is a chemical enterprise, which needs to make ultrafish smashing of small soda, investigating a number of powder equipment companies, and finally chose our AlPa Steam Jet Mill Machine of Iron Diboride.
Technical parameters:
finished particle size: D97: 20UM
Production capacity: 10-220kg

Welcome to inquire!