With the development of society and life, the demand for Jet Mills of SLAG is increasing in the industry, and the requirements for fineness, purity and pass rate are increasing. In the current market, there is a great development space.
Jet Mills of Slag forms a set of pulverization systems. After the compressed air is dried, it is sprayed into the pulverizing chamber by the Lavar nozzle, and the material is repeatedly collided, friction, shear and pulverized, and the crushing material is pulled down with the wind turbulence. Airflow movement to the hierarchical region, under a powerful centrifugal force generated by high speed rotation, so that the crude material is separated, and the fine particles that meet the particle size requirements are collected by the grading wheel into the cyclone and the dust collector, and the crude particles drops to the pulverizer to continue pulverization. . Since Jet Mills of Slag's crushing chamber structure is simple, it is easy to manufacture, so it is widely used.The working principle of Jet Mills of Slag is: the compressed air is dried, and the pulverizing cavity is entered by the nozzle. In the pulverizing cavity, the material can be pulverized by a high pressure gas stream. Thereafter, the crude material can be separated from the centrifugal force generated by the grading turbine. Particles that meet the particle size requirements are in the cyclone separator and the dust collector, and the particles collected, and the particles that do not meet the requirements continue to be pulverized.
Ultra-micro Jet Mills of Slag before debugging before debugging:
1, newly installed equipment Waiting for foreign matter. In the absence of the fan and the main motor, open the implicit baffles under the feed port, allowing impurities and washing materials to be discharged from here. After the end, open the ultrafine pulverizer observation door, check whether there is impurities in the pulverizer, hammer head and ring gear have problems. 2, before checking everything is normal, the power-on starting the device, check the direction of rotation of all motors.
3. Parameter inspection setting for the two inverters of the ultrafine pulverizer's feed motor and the graded wheel motor, check if the air open, contactor, heat relay, overcurrent relay adjustment is appropriate? Return all lines all over again.
4, check whether the solenoid valve is blown normally, regulate the dust collector solenoid pulse width and blow interval.
5. Check if the cleaning of the cleaners under the brake dragon has a leakage, can be placed in the interface with the hand or fine powder, there is a feeling of suction, if there is a sealing treatment. After all of the above tests are normal, prepare the material production.
ALPA Paint Slag Jet Mills of SLAG Case Sharing: This customer is an investigation of domestic similar companies, and has not found a crusher who can smash the paint slag. Finally, I know our Shan dong a through a friend.LPA is a non-standard custom-made company that is a super-smashing equipment, hugging to find us.We have repeatedly tried, and we found a super-pulverizing machine suitable for crushing paint slabs.Finally, the customer purchased our company's Jet Mills of Slag, which is the most crushed oil paint slag.
finished particle size: D90: 800 目
Production capacity: 800-1000kg
If you have something about other crushers, you want to know, welcome to consult!
