With the development of the times, the progress of society, the development of the market is elegant, and more and more manufacturing have to accelerate innovation, some transformations, some continue to improve the technical level of the product, to adapt to the development of the market, Meet the customer's picky requirements. In the case of continuous changes in the market, only constantly innovation, constantly improve your technical level, and constantly improve your own products, you can make the Steam Jet Mills for Zircon Sand industry has a broader development space.
Steam Jet Mills for Zircon Sand should be installed in a place where the site is flat. Pick the processed material before work, no metal, stone, etc. hard substances are mixed into the machine, so as not to damage the parts or failures in the machine. Check that each component is firm and reliable before booting. Everything is normal, the side can turn on the power, idle for 1-2 minutes, check whether the operation is normal, everything is normal, it can be pushed. When working, the operator cannot leave. Once the sound is abnormal, the power should be disconnected immediately. When machining raw new friends Chinese medicine crusher, the discharge opening should be tied to the bag. When the pulverizer is in use, if you encounter the power supply voltage, do not use it, so as not to damage the motor. When the power supply voltage is normal, the machine is not easily damaged, and the production efficiency is high.Steam Jet Mills for Zircon Sand Working Principles: By manually put the material is uniform, feed into the pulverized port, under the action of the fixed knife and rotary knife, and cut various straw into small segments. Then enter the crushing chamber, under the strong hit of the high-speed hammer, the material is rapidly pulverized, due to the large amount of the wind pressure and the large amount of wind pressure in the built-in fan, the pulverized material falls into the screen. The lower chamber is sent from the wind pressure transfer pipe to the aggregate room.
Ultraflight Steam Jet Mills for Zircon SAND Operation:
1, check whether there is oil in the lubrication before power on.
2, clearing the metal, sand, stone and other debris in the material to prevent damage to the machine.
3, the hand must not reach into the feed port, and the cover must not be opened in the operation.
4, the screen aperture should be appropriately selected, and the damage is required.
5. It is strictly forbidden to start the load, the machine is running a minute and then feeds, and the appropriate amount of water is marked.
6, the air is idling in front of 2 minutes to turn off the machine.
AlPa Precipitated Sulfate Steam Jet Mills for Zircon Sand Case Sharing: Shenzhen Chemical Raw Material Company requires multiple large production, low particle size precipitated sulfate crushing production line. Our AlPA is a large enterprise in the powder equipment industry, and our equipment is customized. Using non-standard custom-made ways to meetSimilar to the company.In response to the needs of the company, our company customizes the production line of five Steam Jet Mills for Zircon Sand, large mechanical crusher production lines to meet the customer's production needs.
Technical parameters:
Finished particle size: D50: 0.8-5μm
Production capacity: 4.5 +/- 10% / T
The company can provide free experiments and testing, andProvide 24-hour consultation service, welcome.
