Steam Jet Mill Crusher for Sodium Gluconate is good, only need to be produced in a smooth ground place, and low noise, can avoid dust leakage during the pulverization process, favored by the powder industry.
The distinction between the ultrafine pulverizer and the ordinary pulverizer in the crush:
The ordinary pulverizer can only be smashed into 200 mesh, and 200 mesh is 75 microns. It is the size of the flour, and the ordinary flour is about 80 mesh 160 mes, that is, 90 to 180 microns, this is the thickness of the ordinary pulverizer to print powder.
The ultrafine pulverizer can be super micro-pulverized, can be smashed to 10,000 mesh, 10,000 mesh is 1.3μm, which is equivalent to the particles of the flour, and then pulverized into 70 copies, each size is 10,000 mesh, can It is very thin.
Ultrafine Steam Jet Mill Crusher For SoDium Gluconate Working Principle: Ultrafine Crusher is fed into the grinder between the body and the guide circle, in the pulverization room of the feeder. Under the interior high-speed rotating blade impact, the material is attached to the gel fixed to the body, resulting in impact, shearing, and material, material and the blade, the mutual collision between the ring gear, and the shear. After the powder, under the tension of the negative pressure airflow, the small powder grains overcome self-weight, the over the guide circle with the gas flow, and enter the grading chamber. The fractionation impeller consists of the blade, and the high-speed rotating blade produces a centrifugal force opposite to the negative pressure, and the powder particles in the leaf can be subjected to a negative pressure gas stream and the granularity of the granules, the centrifugal force generated by the impeller, and the particles are larger than the critical diameter ( The granular particles of the grading particles are large, and the pulverized chamber continues to be pulverized, and the particles smaller than the critical diameter are discharged through the drain tube into the whirlwind collector. The higher the rotation speed of the hierarchical impeller, the finer the graded particles, and the rotation of the orthogonal impeller is the determinant of the size of the particle size.
How to choose an energy saving and consumption that can achieve ultrafine grading, but also has an emission standard, good working environment, beautiful Steam Jet Mill Crusher for SODIUM Gluconate, give everyone a few suggestions:
First, according to the characteristics of the material you have to crush, from the hardness, fineness, yield, added value, the amount of metal impurities such as iron, etc., the liquidity of the metal impurity content, material What are the initial judgment of the classification machine type.
Second, according to the type of the classifier, which model is a superfine gas flow classifier. Which models are coarse grading machines, which models can be crushed with higher hardness materials, which machines Type is the root stem, fiber, greaseSmashing classifier.
Technical parameters:
finished particle size: D90: 13μm;
Production capacity: 130kg / h
