In this economically flourished area, there are many people who know Steam Jet Mill Pulverizer for Anhydrous Citric ACID, crusher technology is in a leading position in the same industry.
Steam Jet Mill Pulverizer for Anhydrous Citric ACID is a classified device that is relatively wide range of applications in the current phase, which has very good fineness in production of products produced, and can be well pulverized Silicon, metal, ore and other substances, and also capable of purifying ceramics, medicine, and biochemical products.The principle of Steam Jet Mill Pulverizer for Anhydrous Citric ACID is to utilize the relative movement between the active gear and the fixed tooth disc, so that the material is hit, friction, and materials from each other; the impact is pulverized. The combined material is automatically entered into the prenatal bag through the effect of rotating centrifugal force, and the dust is filtered by the vacuum cleaner. Our constellation machine's crusher is designed according to the \"GMP\" standard, all of which are manufactured in stainless steel materials, and there is no dust in the production process. And can improve the utilization rate of materials, reduce the cost of enterprise, and have reached a high level of professionalism.
Now let's talk about the troubleshooting of Steam Jet Mill Pulverizer for anhydrous citric acid.
Steam Jet Mill Pulverizer for Anhydrous Citric ACID Troubleshooting:
1, feed back and irrigation: Improper tunnel adjustment, pipeline blockage, screen jam, dust bag gas permeability or severe wear, hammer The wear is serious, etc. can cause feedback. When this happens, you should find out the cause, then take elimination measures, or remove the valve, replace the powder bag, improve the breathability, or replace the hammer head.
2, bearing overheating: When the bearing lubrication is poor, the damage or the spindle bend, the rotor is severely imbalance, and the belt is too tight and the bearing is overheating. By replacing the lubricant, replace the bearing and spindle, balance the rotor and adjust the belt, the bearing can return to normal state.
3, the strong vibration of the airflow pulverizer: The mounting hammer is wrong. The corresponding weight deviation of the two groups of heavy hammers is too large, the bearing is damaged or the spindle is bent, and the foot is connected to the screw. According to the specific reason, step by step.
4, there is a sound inside the crusher: the part of the crusher is damaged, fall off or hard, such as stone and iron into the machine, that is, the external sound will be generated, and the machine should stop replacing damaged components or remove hard objects.
5, low production efficiency: insufficient electric power, the belt wheel is improper, the belt is slippery, the hammer is worn, the raw material is uneven or the originalHigh water content is the main reason for the low production efficiency.
We need to regularly check the machines and equipment to ensure proper work, which not only guarantees the safety of people, but also improves equipment efficiency.
Welcome all major powder grading needs manufacturers, visit the factory, incoming experiments.
