The airflow pulverizer plays a vital role in the current industrial production. In various major minerals, chemical industry, pharmaceutical industry, and food manufacturing industries are widely used. With the continuous development of airflow crushers, the various major industries are particularly medical, and the food industry puts forward new requirements in the pulverization process. It is desirable that the powder can be kept clean. In the manufacture of traditional airflow pulverizer, carbon steel, stainless steel is generally used as the lining material of the airflow pulverizer.
Steam Jet Mill Grinder for Anode Material and cyclone separators, dust collectors and air structures have become a complete crushing system. After filtering the compressed air, the high-speed nozzle is sprayed into the pulverized chamber, and the material is repeated, friction and shear at the intersection of the multi-high pressure airflow. The crushing material moves from the rising airflow to the grading area under the suction of the fan, producing a strong centrifuge generated by a high speed rotation. Under the action of force, the fine particles are separated, and the cyclone and dust collectors are collected by the granular particles, and the coarse particles fall into the pulverized region to continue pulverization.Steam Jet Mill Grinder for Anode Material is designed and developed using a mixed powder spraying principle. Suitable for pharmaceutical, food, chemical and other industries. It is widely used. Cold source forms a closed circuit circulation system, which takes advantage of energy and energy conservation: Wenjing pulverized can drop to zero down 196 degrees, depending on the brittle temperature of the material, the temperature can be controlled by the pulverization process, select the best grinding temperature, reduce the pulverization fine The degree can reach 10-700 energy consumption, and even reach micron wood fineness.
The daily maintenance of Steam Jet Mill Grinder for Anode Material is a very important part, which introduces the maintenance method of Steam Jet Mill Grinder for Anode Material.1. When the machine starts or starts, the appropriate amount of grease should be applied to ensure its life.
2. Check if the screws and nuts of each component are tightened. Check if the belt is smashed, whether it is tight. 3, regularly check the reliability of the equipment, prevent accidents or accidents.
4, the direction of operation of the spindle should be correct. If it is incorrect, it should be handled in time to avoid damage to the machine.
5, equipment maintenance should be carried out by professional and technical personnel, and others must not be carried out to avoid damage to the equipment.
6, electrical components and lines should be checked regularly, whether it is intact, and the ground is reliable.
7. The equipment should be cleaned in time to prevent the next use to avoid contaminating materials.
Alpa Aluminum Silicate Steam Jet Mill Grinder for Anode Material:A environmental protection technology company requires grading of aluminum ferrite because of production demand, because uncertain demand can not be achieved, so the experiment is carried out, and the company can provide the company's aluminumUltrafine powder is classified, and finally the product granularity obtained by the experiment: D90: 18.3μm, yield: 460kg / h 加 加 加..
Welcome all major powder grading needs manufacturers, visit the factory, incoming test experiment.
