Steam Jet Mill Grinder of OMEPRAZOLE

In many crushing methods, Steam Jet Mill Grinder OMEPRAZOLle has become one of the most mainstream pulverization techniques with a small particle size, narrow particle size distribution, high purity, high particulate activity, and good dispersibility. Especially suitable for crushing drugs such as contaminated materials.

The distinction between the ultrafine pulverizer and the ordinary pulverizer in the crush:
The ordinary pulverizer can only be smashed into 200 mesh, and 200 mesh is 75 microns. It is the size of the flour, and the ordinary flour is about 80 mesh 160 mes, that is, 90 to 180 microns, this is the thickness of the ordinary pulverizer to print powder.
The ultrafine pulverizer can be super micro-pulverized, can be smashed to 10,000 mesh, 10,000 mesh is 1.3μm, which is equivalent to the particles of the flour, and then pulverized into 70 copies, each size is 10,000 mesh, can It is very thin.

Steam Jet Mill Grinder of OmePrazole Working Principle:

After entering the hierarchical feed port, the distribution disc on the vertical hierarchy is evenly distributed and Throw into the ring and fall into the grading area.

The graded air enters the spiral wind chamber, through the guide disk blade flows into the grading wheel in the center direction, and the fine powder satisfying the particle size is separated under grade gravity. Fine powder flows at high speeds and enters the fine powder trapping system from the grading air and then separated from the grading air. The coarse powder falls into the lower part of the graded machine.


How should Steam Jet Mill Grinder OMEPRAZOLLE starts
Before starting, first rolling the rotor first, check the jug, hammer and rotor operations are flexible Dressing, there is no bump in the shell, the rotation direction of the rotor is not the direction of the direction of the arrow, the power machine and the pulverizer are not outstanding. Do not replace the leather wheel at will, to prevent the transition chamber produce burst of pulverization, or the speed is too low

affect the work efficiency of the pulverizer. After the airflow pulverizer starts, it should be idled for 2-3 minutes, no abnormal appearance, then press the job. At any time, you should pay attention to the job status of the crusher, and the feeding should be uniform to prevent jams, do not have long-term overload operations. If there is found that vibration, noise, the bearing and the body temperature is too high, the external spray, etc., should be immediately stopped, exclude the failure of the sustainable job.

ALPA Raw Powder Steam Jet Mill Grinder OMEPRAZOLE Case Sharing:
A mechanical equipment company, company mainly produces pharmaceutical equipment andPowder automation equipment, and agent the import of imported equipment in the United States and Germany, the company has the advantages of technology and the team's cohesiveness has a rapid development and breaks the monopoly of foreign equipment in the industry.

Case parameters:

Product particle size: D90: 2-80UM
Hour Yield: 50-80kg

For more consultation, please pay attention to us, or inquire.