Jet Mills for Glaze is mainly suitable for the crushing mechanism to determine its application range, high finished product and improvement, widely used in chemical, minerals, metallurgy, abrasives, ceramics, refractories, pharmaceuticals, pesticides, food, health products. , New materials and other industries.
The variety of Jet Mills for Glaze now is very large, and its grading quality and level are very large. In general, the evaluation of grade grading performance is expressed in grading efficiency and grading accuracy. But the current level of grading efficiency and grading accuracy have many inconveniences in practical applications. Through the analysis of the classification efficiency of the collected evaluation grade performance and the level of grading accuracy.
Jet Mills for Glaze works as: the compressed air is dry, and the pulverizing cavity is entered through the nozzle. In the pulverizing cavity, the material can be pulverized by a high pressure gas stream. Thereafter, the crude material can be separated from the centrifugal force generated by the grading turbine. Particles that meet the particle size requirements are in the cyclone separator and the dust collector, and the particles collected, and the particles that do not meet the requirements continue to be pulverized.
Jet Mills for Glaze is a crusher, any mechanical equipment, has certain precautions before use, must check the precautions to operate, minimize the damage rate, then What is the precaution before using a jet ball mill? Here are some introductions. 1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.
2, the pulverizer should be lubricated in accordance with the requirements so that the machine is operating normally.
3, the material cannot be mixed before the grinding machine is added to avoid damaging the pulverizer.
4, the pulverizer does not have foreign matter or debris. If it should be handled in time to avoid damage to the tool.
5. When using the crusher, if there is abnormality, it should be handled immediately to avoid a large loss.
6. If damage should be replaced immediately, certain components should be checked regularly.
ALPA Pigments Jet Mills for Glaze Case Sharing: This customer needs to use the pigment ultrafine pulverized equipment during its production. Through the ultrafine pulverization of the pigment, improve the quality of the product, after many other types of equipment, finally chose our AlPa Jet Mills for Glaze. Compared with the same type of equipment, our company's product reliability is higher, the pulverized particle size is more uniform, and the particle size after pulverization is narrow, and there will be no too much particle size range.
Finished particle size: D90: 13μm;
Production capacity: 130kg / h
ALPA powder is committed to the development, production of ultrafine powder and grading equipment SellSales, support according to demand, equipment model, reliable quality, high efficiency, low energy consumption, easy operation, reasonable price, 24 hours can consult!
