Steam Jet Mill for Zinc Bacitracin can be used for important or need to be grounded to granular product processing, AlPA ultrafine pulverizer products are good, affordable, factory direct sales, also to promote after-sales service service for customers, good service attitude
High Temperature Steam Jet Mill for Zinc Bacitracin Performance Features:
1, in-room classification device, product particle size D97: 8-150 microns adjustable, particle shape, narrow particle size distribution.
2, can be used in series with the classification machine, and produce a plurality of particle size sections 1 time.
3, equipment disassembly and packing is convenient, and the inner wall is smooth and no dead angle.
4, the whole system is closed, the dust is small, the noise is low, and the production process is clean and environmentally friendly.
5, the control system uses program control and easy to operate.
What is the grading principle and process of Steam Jet Mill for Zinc Bacitracin? Below below, share it with you.
1. Open the switch in the control cabinet, start the power supply, equipment operation;
2, the raw material enters the feeder
3, the raw material enters the feeder injector in the feeder
4, the raw material reaches the hierarchical body after special dispersion, grading through physical effects such as airflow and gravity;
5, the airflow of the three flow paths has the control valve group adjustment to maintain their respective balance;
6, grading The rear coarse fine product is recovered separately;
7, clean air is discharged into the atmosphere.
Ultraflight Steam Jet Mill for ZINC Bacitracin is a widely used system with ultrafrinkled equipment with air separation, heavy polishing, and shear. It is widely used in various industries. Let's take a brief introduction to its daily maintenance content.
1, when the bearing oil is high, it is necessary to stop checking the cause of the fault and removal immediately.
2, easy to wear parts should pay attention to the degree of wear, pay attention to and do the preparation for replacement of parts.
3, for the top surface of the chassis of the active device, it is necessary to remove dust and other debris avoiding the machine that cannot be broken, the active bearing cannot move on the chassis, causing an accident.
4, all loads of the machine are bearings, so good lubrication and bearings have a large relationship, it can directly affect the service life of the machine and the operating rate, so the amount of lubricating oil required to be injected should be reached. Good seal.
5, the sleeper installed is easy to loosen, and it must be checked frequently.
6. Note that the operation of each part of the machine is not positiveOften.
7. If the rotating gear is in operation, if there is a hitting sound, it should be stopped in time and remove the fault.
ALPA Steam Slag Steam Jet Mill for Zinc Bacitracin Case Sharing: The customer is a steel slag reuse technology company, which is mainly engaged in steel slag sorting project.Through the experiment, our AlPA classifier reached customer needs.
Product particle size: D80: 23.4
Yield: 175kg / h 加 加
Weifang AlPa well-known airflow crushing equipment brand, free professional transport plan, German advanced process, stable performance, airflow pulverization equipmentHigh efficiency, support customization !!!
