Steam Jet Mill Machine of Wheat Germ This product technology has been widely valued by the industry. Steam Jet Mill Machine Of Wheat Germ is mainly used to determine its wide range of applications, high-fine, typical materials: super hard diamond, silicon carbide, metal powder, high purity requirements: ceramic pigment, medicine, biochemistry, medicine. Steam Jet Mill Machine of Wheat Germ converts the normal gas from the gas source portion to nitrogen, carbon dioxide, etc., is an inert gas protection device, which is suitable for use in flammable and explosive, oxidized materials, smash, grading, and processing.
The airflow classification is based on centrifugal force, gravity, inertial force, etc., produces different motion trajectories depending on the gas (usually air), gravity, and inertial force to achieve different particle sizes. Classification. Steam Jet Mill Machine of Wheat Germ can be divided into static classifiers and dynamic classifiers according to whether moving parts are moving. Steam Jet Mill Machine of Wheat Germ has become better and better. Many industries need to control the particle size of fine powder.
Steam Jet Mill Machine of Wheat Germ Principles: When the compressed gas enters the crusher by the feeder, the pulverized raw material enters the pulverizer, there are multiple pulverized nozzles in the pulverizing chamber, and the supersonic air flow is injected, so that the material is affected by the gas stream. High-speed shock and material collision, friction, and pulverized, the grading tube separates the thicker particles, the crude particles are circulated to the pulverizing chamber to continue pulverizing, after the interior closed circuit circulation is pulverized, and finally the distribution of uniform dispensing in the discharge port. . 1. Suitable for dry ultrafoil. Due to the large impact speed, it can reach 2.5 Mach or more. It is easy to obtain 1-10 micron particles, depending on the material properties, it is possible to obtain less than 1 micron particles. 2. Because there is a closed-circuit classification mechanism inside the pulverizer, the product is thick The particles are constantly pulverizing, and therefore the particles are uniform, small particle size distribution ranges are obtained. 3, the device has short-striped time, simple structure, convenient operation, small area, low noise (72 decibel) and no vibration. 4, the efficiency of the pulverization is high, which can be pulverized, and the purity of the pulverized article can be maintained.
In order to achieve better use, you must pay attention to the daily maintenance of Steam Jet Mill Machine of Wheat Germ, pay attention to the following:
1. In the production process, you should regularly check the gas flow grinder bearings. Temperature rise, when the temperature rise exceeds 50 ° C, the examination should be stopped, find out the cause, and troubleshoot.
2. When using the pulverizer, the transmission belt is easily stretched, and should pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should often be performed to ensure quality and production.
4. Continuously check the wear of blade and bushing, if the productivity is lowered, the particles are thicker, and will be replaced after wear.
5. The change period of the pulverizer bearing is 2000 hours, and the amount of the bearing cavity is 1 ≤ 2 (try) or 3 ≤ 4 (try), otherwise the bearing temperature is too high.
Technical parameters:
finished particle size: D50 less than 5μm
Production capacity: greater than 50kg / h
