Many friends who want to make industrialized production must be unfamiliar with Jet Mill Grinder of Microcrystalline Graphite. Jet Mill Grinder of Microcrystalline Graphite has a very convenient, crushing speed, and crush product quality. It is a very useful. Crush machine.
A Jet Mill Grinder of Microcrystalline Graphite costs, if you want to use Jet Mill Grinder of Microcrystalline Graphite for a long time, please pay attention to the following:
1. In the production process It should often check the temperature rise of the bearing, when the temperature rise exceeds 50 ° C, should stop the examination, find out the cause, and troubleshoot.
2. When the new machine is running, the transmission belt is easy to eliminate, so it should be noted to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should be performed in time to ensure quality and production.
4. The wear of the blade and bushing should be continuously checked. If the productivity is lowered, the particle size is thick after wear, and the wear is immediately replaced.
5.Jet Mill Grinder of Microcrystalline Graphite's host and level distribution bearings are lubricated with special grease (265-295 degrees).
6. The replacement period of the bearing is 2000 hours, and the amount of oil filling of the bearing chamber gap is 1 ≤ 2 (try) or 3 ≤ 4 (try), if it is not too much, the bearing temperature Will be too high.
7. The replacement period of the spiral feeder is 4,000 hours, and ordinary calcium based grease is added. Standard operation to exchange for longer use of airflow crushers.
The above is a 7 point of Jet Mill Grinder Of Microcrystalline Graphite's daily maintenance.
The main performance characteristics of the airflow pulverizer: 1, which contains vertical grading equipment, product size D97: 8 150 microns adjustable, good particle shape, narrow particle size distribution. It can be used in series with multi-stage classifiers, or producing multiple granular products at a time. 2, the device is disassembled and cleaned, the inner wall is smooth, no dead angle. The entire system is closed, less dust, low noise, clean and hygiene production process. 3. The control system uses program control and easy to operate.
Jet Mill Grinder of Microcrystalline Graphite has many core accessories, and these attachments are also fragile parts. Once they don't pay attention to repairs, it will cause serious consequences, especially if the airflow grinding spindle will cause downtime, and cannot estimate the output loss, and the following is introduced. Causes of gas flow grinding the main axis break.
The cause of the airflow grinding main shaft is easy to damage:
1. Since the pulverizer is a long-time crushing and ground bulk ore, the mechanical impact will cause fatigue damage to the spindle, if it is operated, the surface of the spindle Will wear, if you don't pay attention, cracks are generated.
2. The air supply will pass the airflower overload. When gas flow is used, you need to feed it properly, and each machine is limited. If this is exceeded, the component is easily damaged in the load operation, which will affect the overall service life of the airflow.
The above is why Jet Mill Grinder of Microcrystalline Graphite spindles is easily damaged.
ALPA modified quartz, silicon micro powder Jet Mill Grinder of Microcrystalline Graphite case Sharing:
A material company is a research and development of a series of products such as inorganic non-metallic powder materials and surface treatment. High-tech enterprises that serve production, sales and technology services.
The company has a series of automated production equipment and testing instruments such as fine grinding, precision grading, and surface cover to compound mixing; high purification, ultrafine, sphericalization, and Its surface coating treatment is deeply processed, whether it is a formulation optimization or a custom research and development of new products.
Case parameters
Product particle size: D50: 3-45UM
Hour Yield: 3-10kg
