With the continuous increase in social needs, Steam Jet Mill Pulverizer Of Dolomite is constantly improving in terms of performance, finished product quality, service life, etc., very good, processed raw materials into microtes and even nano-grade micropowder, and Wide applications in many areas such as chemical, food, pesticides, cosmetics, dyes, coatings, and electrons have been widely used.
The airflow classification is based on centrifugal force, gravity, inertial force, etc., produces different motion trajectories depending on the gas (usually air), gravity, and inertial force to achieve different particle sizes. Classification. Steam Jet Mill Pulverizer Of Dolomite can be divided into static classifiers and dynamic classifiers according to whether there is moving parts. Steam Jet Mill Pulverizer Of Dolomite has become better and better. Many industries need to control the particle size of fine powder.
Ultrafine Steam Jet Mill Pulverizer Of Dolomite Working Principle: Ultrafine Crusher Troubles in the feed port spiral feeder, the material is fed into the crushing chamber between the body and the guide circle, rotating at high speed in the comminution. Under the blade impact, the material is attached to the gel fixed to the body, resulting in impact, shearing, and material, the material and the blade, the mutual collision, friction, and shear inter alternate. After the powder, under the tension of the negative pressure airflow, the small powder grains overcome self-weight, the over the guide circle with the gas flow, and enter the grading chamber. The fractionation impeller consists of the blade, and the high-speed rotating blade produces a centrifugal force opposite to the negative pressure, and the powder particles in the leaf can be subjected to a negative pressure gas stream and the granularity of the granules, the centrifugal force generated by the impeller, and the particles are larger than the critical diameter ( The granular particles of the grading particles are large, and the pulverized chamber continues to be pulverized, and the particles smaller than the critical diameter are discharged through the drain tube into the whirlwind collector. The higher the rotation speed of the hierarchical impeller, the finer the graded particles, and the rotation of the orthogonal impeller is the determinant of the size of the particle size.
Steam Jet Mill Pulverizer Of Dolomite is important, you need to pay attention to the following:
1, should check all the lines, electrical components, etc. of the pulverizer, whether it is possible to work. Whether the machine is grounded, so that the housing is powered by electric shock. Whether the machine spindle has a card death, if it should be handled in time. Whether the machine has an abnormal situation during operation, if there is a stop check.
2, check the blade, is tightened, whether the blade gap can reach the specified standard. Before using the pulverizer, check the working room is enough or slidable, if it should be removed in time.
3, after the offline is running, it can startmaterial.The pulverizer should stop the feed before stopping.Wait until the machine is completely discharged, it can be stopped.
4, the feed should be uniform, not over, so as not to increase the burden on the machine.The pulverizer cannot be cleaned, maintenance, etc. during operation.
Technical parameters:
Finished particle size: D50 less than 5μm
Production capacity: greater than 50kg / h
