With the continuous development of pulverizer technology, Steam Jet Mill Crusher's Metal Strip has gradually penetrated into daily life.
Steam Jet Mill Crusher OE Metal Strip can effectively reduce costs, reduce costs, so applicable to low value platinum powder. And the structure is simple, the maintenance is convenient, because if the lifting member is less, the noise in the runtime is small, and the energy consumption is low. And this grader does not use the powder box grading wheel structure, more simple operation, more convenient maintenance. So it is capable of improving production capacity. At the same time, its inner wall is also smooth and wear, so it is also more conducive to the grading of materials. In addition, the hierarchy is a negative pressure operation, which can make it dry to out of the skin to achieve environmental requirements. The operation is stable, the reliability is good, and the graded product can also remain uniform, consistent.Steam Jet Mill Crusher Of Metal Strip is disposed with a particularly designed high-pressure intake nozzle, which is purified from the nozzle, forming an ultrasonic air flow through purification and dry compressed air. Materials collide in the center of the high-speed airflow intersection, and it is pulverized in an instant. The pulverized particles rose to the grading chamber, and the qualified particles enter the cyclone separator with the gas, and finally obtain the desired product, the exhaust gas enters the dust collector.
The turbine grading system set in the classification room can obtain a powder of micrometers or even finer. When the pulverized material is pulverized in the pulverized chamber, the same particles at the edge of the turbine will be attached to the two different effort of the centrifuge field (i.e., centrifugal force and airflow resistance generated by turbine). When the particles are large, the centrifugal force is greater than the resistance, and the large particles fly toward the chamber pool wall along the turbine tangential direction, and then returned to the pulverizing chamber to be re-pulverized. When the particles are small, at this time, at this time is less than the resistance, the small particles enter the interior of the turbine with the rising airflow, and collectively collected by the cyclone to qualified products.
Today, let's take a look at how the Steam Jet Mill Crusher's Metal Strip is maintained.
1. Because the blades in the fan are particularly easy to accumulate, so they must clean the dust in the fan every week.
2, add the bearing box once a month.
3, if there is an abnormality in the fan, it is necessary to stop the ultrafine gas flow classifier for inspection.
Second, the host
1, you should check the graded impeller, spiral feeder, smash nozzle each year, see if there is wear, whether there is a place to replace.
2, running to a certain time, in order not to affect the use of ultrafine gas flow grading machine, some parts must be cleaned.
3, bearing advancingRow the amount of lubrication, too much will abnormally.
Third, the planet waste valve
1, if the ultrafine airflow classifier has an abnormality, it must be downtown immediately.
2, the impeller and the body are cleaned every three months.
3, plus lubricants should also have every three.
AlPa Gypsum Steam Jet Mill Crusher Of Metal Strip Case Sharing: The company is a more well-known non-metallic mine company in South Africa. The company's main product is a super fine ultra-fine powder of non-metallic mine such as stone and gypsum.Through our website, the company learned our equipment and saw our case, and finally selected Steam Jet Mill Crusher of Metal Strip of our company as its gypsum ultrafine powder production line.
Technical parameters:
Finished granularity: D97: 5UM
Over-classization machine produced by ALPA, grading machine equipment such as precision classifier can be multipleParticle size can be produced simultaneously.Welcome new and old customers to come to consult!
