In the rapid development of rapid development, many people have a certain understanding of Jet Mill Machine for Food, and crusher technology is in an absolute leader in the industry.
Jet Mill MACHINE FOOD temperature will rise during work, and when the temperature of the working fluid is too high, the flow rate of the gas increases. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.
JET MILL MACHINE FOOD is designed and developed using a mixed powder spraying principle. Suitable for pharmaceutical, food, chemical and other industries. It is widely used. Cold source forms a closed circuit circulation system, which takes advantage of energy and energy conservation: Wenjing pulverized can drop to zero down 196 degrees, depending on the brittle temperature of the material, the temperature can be controlled by the pulverization process, select the best grinding temperature, reduce the pulverization fine The degree can reach 10-700 energy consumption, and even reach micron wood fineness.JET MILL MACHINE FOOD operation process is important, you need to pay attention to the following:
1, check all the lines, electrical components, etc. of the pulverizer, whether it can work properly. Whether the machine is grounded, so that the housing is powered by electric shock. Whether the machine spindle has a card death, if it should be handled in time. Whether the machine has an abnormal situation during operation, if there is a stop check. 2, check the blade, is tightened, whether the blade gap can reach the specified standard. Before using the pulverizer, check the working room is enough or slidable, if it should be removed in time.
3, after the offset is running, it can begin to start the feed. The pulverizer should stop the feed before stopping. Wait until the machine is completely discharged, it can be stopped.
4, the feed should be uniform, not over, so as not to increase the burden on the machine. The pulverizer cannot be cleaned, maintenance, etc. during operation.
ALPA Chicken Protein Jet Mill Machine for Food Case Sharing: The company is a company in Spain, the company needs to smash a chicken protein, asking all the European powder equipment companies, no Suitable equipment. Later, I learned about our ALPA through the website, and the testism sent us a message.After receiving the email, we are not very sure that the material can be done.But our ALPA still decided to try it, and then let the customer maidens will be experimentally.Through multiple experiments, we have identified a crushing equipment that meet the particle size needs of the company.Finally, the company also purchases the series of equipment.
finished particle size: 100μm
Production capacity: 500kg
For more consultation, please continue to pay attention to us, or inquire.
