Many friends who want to produce industrialized must be unfamiliar with Steam Jet Mill Grinder Of Borneol. Steam Jet Mill Grinder of Borneol has the characteristics of convenient, crushing speed, and quality of crushing products. It is a very useful. Crush machine.
The variety of Steam Jet Mill Grinder of Borneol is now very much in the market, and its grading quality and level are very different. In general, the evaluation of grade grading performance is expressed in grading efficiency and grading accuracy. But the current level of grading efficiency and grading accuracy have many inconveniences in practical applications. Through the analysis of the classification efficiency of the collected evaluation grade performance and the level of grading accuracy.
Steam Jet Mill Grinder Of Borneol Principles: When the compressed gas enters the pulverizer by adding the injector, pulverizing the raw material, there are multiple pulverized nozzles in the pulverizing chamber, and the supersonic air flow is sprayed, so that the material is high-speed high-speed The impact and the material collide with each other, friction and pulverize, the grading tube separates the thicker particles, the crude particles continue to be pulverized, and after the internal closed circuit is pulverized, ultrafine powder can be obtained in the discharge port. 1. Suitable for dry ultrafoil. Due to the large impact speed, it can reach 2.5 Mach or more. It is easy to obtain 1-10 micron particles, depending on the material properties, it is possible to obtain less than 1 micron particles. 2. Because there is a closed-circuit classification mechanism inside the pulverizer, the product is thick The particles are constantly pulverizing, and therefore the particles are uniform, small particle size distribution ranges are obtained. 3, the device has short-striped time, simple structure, convenient operation, small area, low noise (72 decibel) and no vibration. 4, the efficiency of the pulverization is high, which can be pulverized, and the purity of the pulverized article can be maintained.Steam Jet Mill Grinder Of Borneol starts how to operate
Before starting, first scroll the rotor, check the jaw, hammer and rotor operation, is not flexible, there is no in the shell Touching the appearance, the rotation direction of the rotor is the same as the direction of the machine arrow, the power machine and the pulverizer are not outstanding. Do not replace the leather wheel at will, to prevent the transition chamber produce burst of pulverization, or the speed is too low
affect the work efficiency of the pulverizer. After the airflow pulverizer starts, it should be idled for 2-3 minutes, no abnormal appearance, then press the job. At any time, you should pay attention to the job status of the crusher, and the feeding should be uniform to prevent jams, do not have long-term overload operations. If there is found that vibration, noise, the bearing and the body temperature is too high, to the outer spray, should be stopped immediately, and the fault is removed.Continuous work.
A material company is a research and development of special products that specialize in inorganic non-metal powder materials and surface treatment,High-tech enterprises that serve production, sales and technology services.
The company has a series of automated production equipment and testing instruments such as fine grinding, precision grading, and surface cover to compound mixing; high purification, ultrafine, sphericalization, andIts surface coating treatment is deeply processed, whether it is a formulation optimization or a custom research and development of new products.
Case parameters
Product particle size: D50: 3-45UM
Hour Yield: 3-10kg
