With the continuous development of pulverizer technology, Jet Mills for Albite has gradually penetrated into people's daily lives.
The overall development trend of China's material ultrafine crushing technology is to make a more ultra-fine pulverized equipment to various types of ultra-fine pulverization equipment towards low-cost, high efficiency, strong dispersibility, good dispersibility and stable quality. High technical requirements.
Jet Mills for Albite Engineering technology will need more and more high-purity ultrafine powder, and ultrafine powder technology will play an increasingly important role in high-tech research and development. Although high-purity ultrafine powder is prepared by chemical synthesis, it is too high, which is extremely difficult for industrial production. The main means of obtaining the ultrafine powder is still mechanical and pulverized, and ultra-fine pulverization technology is a combination of many technologies. Its development also depends on the progress of the relevant technology. Therefore, the main development trend of ultrafine pulverization equipment has been developed with fine classified equipment with ultrafine pulverized equipment. Ultrafine pulverized equipment with low energy consumption, small land, and has high handling capacity. Integrated development of equipment and process research. Ultrafine pulverization and supporting equipment must adapt to specific bored features and product indicators, and the scale model must be more adapted.
Jet Mills for Albite features:
1. High yield, low energy consumption, high grading efficiency.
2. Particle size: This machine uses impeller to grade. Stable classification process and special sealing measures effectively prevent the leakage of crude particles, so that the product has no large particles, the particle size is concentrated, and the grading accuracy is high.
3. The structure is reasonable, and 1-6 kinds of products can be produced simultaneously according to user requirements.
4. Strong applicability: Can form closed or open joint operations with various mill (air mill, mechanical mill, ball mill, thundering machine, vibrating mill, etc.).
5. High degree of automation.
Let's learn together with Xiaobian to learn Jet Mills for Albite inspection steps.
JET Mills for Albite is an ultra-smash device that uses air separation, heavy pressure grinding, shear. It consists of a cylindrical crushed chamber, a polishing wheel, a polishing rail, a fan, a material collection system, and the like. The material enters the cylindrical pulverizing chamber through the feed port, and is crushed along the grinding rail, and the crush is achieved. The pulverized material passes out the pulverizer through the negative pressure air flow caused by the fan, and the material collection system is entered, filtered through the filter bag, the air is discharged, the material, the dust is collected, and the pulverization is completed.
A disc airflow pulverizer first carefully checks whether there is damage in the transportation in the transportation, then put the high machine and the auxiliary electrical control unit in place, and then turn on the pipeline of the main aircraft, each Tanker mouth is required to use a seal to coat the \"iron anchor 609\" liquid.State seal, ensure the sealing of the pipe, and each single machine and pipe are connected to the ground wire, and ground to avoid dust explosion caused by electrostatic sparks. Before each stand-alone trial operation, check whether there is a metal item in the machine, if there is an exclusion. Whether the bolt is firm and the tightness of the belt, the reliability of the shield, and the like. After five minutes of empty bus, the operator should carefully observe the various instruments on the control cabinet, and they can be pushed. After the feed, the current is not allowed to exceed the rated value of 32.6A, otherwise it should be subtracted to ensure that the normal operation of the discharge is fixed. The stepless shift handle of the classifier can change the speed of the hierarchy, and achieve the excellent adjustment of the product. If the product particle size is required, the speed can be improved, and the rotational speed is reduced, and large particle size particles can be reduced.
AlPa lithium iron phosphate Jet Mills for Albite case Share: Expanding the production process, through comparison found that the performance of our ALPA's phosphate phosphate special crusher is not better than the same type of equipment in other powder equipment companies at home and abroad, even in some aspects. After experimenting, the company purchased Jet Mills for Albite.
Technical parameters:
Finished granularity: D50: 3μm
Production capacity: 400kg
