Industrial Steam Jet Mill Grinding As the name refers to a mechanical equipment used in the production area, which is used to pulverize the particles, the pulverization speed is fast, and the accuracy is good.
During the production process, Industrial Steam Jet Mill Grinding mainly utilizes compressed air to pass through freezing, filtration, and drying, and the nozzle inside the device forms an supersonic air airflow. After a powerful pressure rotation is incorporated into the grinding chamber, the material to be pulverized in the grinding chamber exhibits a fluidized form.The working principle of Industrial Steam Jet Mill Grinding is to use high-speed rotating hammers to hit materials, crush the decision surface, the obedient surface and the natural gap. The material sent to the crusher is affected by the rotor, and the rotor rotates around the central axis at a speed of 25 to 40 m / s, and breaks the first time. The material then obtains the energy disc from the rotor, flying on the hard wall at high speed, and performs secondary comminution.
Do you know how to correctly use Industrial Steam Jet Mill Grinding? I hope the content below can help you.
1. Preparation before the pulverizer starts check the host, joint, pipeline, and the valve is normal and working properly. 2, open the pulverizer
(1) Open the compressor power supply, dust pressure valve and the main air valve, open the power switch of the pulverizer, and turn on the power switch.
(2) From scratch, adjust to the specified speed.
(3) Open the fan, cyclone separator, dust removal and charger power, open the total power box, set the frequency of the inverter, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, pulverizer shutdown is: inverter - feeder - main valve compressor - Compressor stage impeller motor - cyclone material, dust removal switch - fan - universal power supply air compressor.
4, eddy current pulverizer maintenance
(1) Periodically lubricate the eddy current pulverizer, but the lubricating oil should not be too large to prevent too high of the bearing temperature.
(2) Checking the wear of impeller, helical conveyors and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag is filtered, it should be cleaned or replaced.
5, Eddy Current Crusher Precautions
(1) When the discharge equipment is running, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller should not exceed the specified requirements, otherwise the temperature is too high, the impeller and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
Erp Pie Mill Grinding Case Sharing:
A mechanical equipment company, the company mainly produces pharmaceutical equipment and powder automation equipment, and acts in imported related equipment imported by the United States and Germany. The advantages of technology and the team's cohesiveness have achieved rapid development and broke the monopoly of foreign equipment in the industry.
Case parameters:
Product particle size: D90: 2-80UM
Hour Yield: 50-80kg
If there is related requirements, please call us!
