With the continuous advancement of crusher technology, Needle Steam Jet Mill Grinding has been familiar with people. The most popular crushing device is now the Needle Steam Jet Mill Grinding. It has a wide variety, available in laboratory, home and factory use. It has the advantages of large productivity, low energy consumption, high automation, and high classification quality, and has been widely used.
High-speed jet enters the crushing chamber, collides with particles, and many times in the friction of high pressure air, shear and pulverized, pulverized materials, and the assembly of rising airflow motion, under the action of the fan, At the power of the rotational speed of Needle Steam Jet Mill Grinding, the thickness of the material is separated from the separation, the fine particle size of the graded wheel into the cyclone separator and dust removal, and the pulverization region of the crude particles continues to be pulverized. The classifier produced by Erfa can perform local internal changes depending on the different characteristics of materials, making it more suitable for the grading requirements of the material. The grading machine has a greater amount of processing, energy saving, simple operation, and low maintenance costs.
Do you know how do you use Needle Steam Jet Mill Grinding? I hope the content below can help you.
1. Preparation before the pulverizer starts check the host, joint, pipeline, and the valve is normal and working properly.
2, open the pulverizer
(1) Open the compressor power supply, dust pressure valve and the main air valve, open the power switch of the pulverizer, and turn on the power switch.
(2) From scratch, adjust to the specified speed.
(3) Open the fan, cyclone separator, dust removal and charger power, open the total power box, set the frequency of the inverter, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, pulverizer shutdown is: inverter - feeder - main valve compressor - Compressor stage impeller motor - cyclone material, dust removal switch - fan - universal power supply air compressor.
4, eddy current pulverizer maintenance
(1) Periodically lubricate the eddy current pulverizer, but the lubricating oil should not be too large to prevent too high of the bearing temperature.
(2) Checking the wear of impeller, helical conveyors and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag is filtered, it should be cleaned or replaced.
5, Eddy Current Crusher Precautions
(1) When the discharge equipment is running, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller should not exceed the specified requirements, otherwise the temperature is too high, the impeller and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
Erfai crack carbon black Needle Steam Jet Mill Grinding case Sharing: The company is a renewable energy application company in Inner Mongolia, when the company recovers the waste tire, it is necessary to use ultrafine pulverized equipment. Ultrafine pulverized carbon black is performed. After many incidents, the NEEDLE Steam Jet Mill Grinding of our El Pie was selected.
Technical parameters:
Finished granularity: D90: 500 目
Production capacity: 2T
El Pie is a research and development and sales ultra-fine classifier, precision classifier, experiment The room classroom and other products are committed to the research and development of the classification machine. Welcome friends in need to come to cooperate to negotiate.
