Most of the product production and processing in the current stage, using Small Steam Jet Mill Crusher, the use of Small Steam Jet Mill Crusher is a very common way of processing method, accompanied by the continuous improvement of scientific productivity, and the technology of grading equipment It is also imminent to replace it. The performance and internal configuration of the grading equipment of the airflow must also keep the trend of the era to continue the upgrade of the product.
Small Steam Jet Mill Crusher is different from other crushers, which is crushed by collision between particles, airflow impact, shear, high-speed airflow of material, shock, friction and shear and other components Crusher. It has the following main features:
1. The grinding temperature is low, which can be pulverized, low melting material. According to the high-speed jet Joule effect, when the gas is thermally expanded, the gas will cool itself, thus canceling the heat generated by collision and friction.
2, short production cycle, high release rate. Due to high-speed collisions and closed crushing, the probability of collision between materials is very large, and dust does not leak.
3, a product having high purity (less pollution), uniform particle size distribution (D95 cumulative frequency) can be obtained.
4. Some materials that require wet pulverization can also be pulverized by airflow pulverization to achieve uniform and small powder.
5, a variety of joint operations can be implemented, and drying operations can be achieved. It can be seen that the research hotspot of the air pulverizer is very highlighted, and it plays a raised role in the pharmaceutical industry.
Small Steam Jet Mill Crusher uses materials to achieve huge kinetic energy under the action of high-speed airflow, causing severe friction between high speed collisions and particle, while high-speed airflow produces shear effects, thereby achieving The purpose of pulverization.
Now let's talk about the troubleshooting of Small Steam Jet Mill Crusher.
Small Steam Jet Mill Crusher Troubleshooting:
1, the feed back is improper, the damper is adjusted, the pipeline is blocked, the screen is blocked, the dust bag is inferior or severe wear, the hammer wear is serious, etc. It will cause feedback. When this happens, you should find out the cause, then take elimination measures, or remove the valve, replace the powder bag, improve the breathable, or replace the hammer head.
3, strong vibration of airflow pulverizer: Installing a hammer is wrong, the corresponding weight deviation of the two groups of heavy hammers is too large, the bearing is damaged or the spindle is bent, and the foot is connected to the screw. According to the specific reason, step by step.
4, there is a sound inside the crusher: the components of the crusher are damaged, fall off or hard, such as stone and iron into the machine, that is, the external sound will be generated, and the machine should stop replacing damaged components or remove hard objects. 5. Low production efficiency: insufficient power of electric machine, misconduct, belt slip, severe hammer wear, high raw material unevenness or high water content is the main reason for the low production efficiency.
We need to regularly check the machines and equipment to ensure normal work, which not only guarantees the safety of people, but also improves equipment efficiency.
El Pie Crack Carbon Black Small Steam Jet Mill Crusher Case Sharing: The company is a renewable energy application company in Inner Mongolia, when the company recovers the waste tire, ultrafine pulverized equipment needs to be used Ultrafine pulverized carbon black is performed. After many incidents, the SMALL Steam Jet Mill Crusher of our El Pie was selected.
Technical parameters:
Finished granularity: D90: 500 目
Production capacity: 2T
