With the demand for society, the demand for Needle Steam Jet Mill Crusher has increasing the demand of Needle Steam Jet Mill Crusher, and the requirements for fineness, purity, and pass rate are increasing. In the current market, there is a great development space.
In terms of airflow milling, it is important to understand that its operational rules are very important, because only the operation procedures can be performed correctly.
First, the operation rules of Needle Steam Jet Mill Crusher are as follows: After the preparation before the boot is received, it is prepared after the production order is received. Complete the site to clean the grocery. Check whether the transportation pipes and auxiliary equipment, whether the pipelines are blocked, leak or poor sealing, whether the auxiliary equipment is intact, whether it can work properly. Whether there is a phenomenon that the material is stacked in the outer casing and the separator, if the accumulated material is required. Whether the bearing is lubricated, whether it is lubricated in an appropriate place. Check if all pipes, fastening bolts, washers, spindles, and instruments are intact, normal and flexible.
Second, NEEDLE STEAM JET MILL CRUSHER starts the motor, control the current and time at starting, so that the device can start running. When the equipment is operating normally, the feed speed can be adjusted according to the properties of the material. Uniform continuous feed should be achieved, not large or small, thereby affecting the separation effect of the grinding machine, making the machine easily fail. During operation, if an abnormality occurs, stop checking immediately before the failure continues.
Third, the main procedures of the closure and inspection of Needle Steam Jet Mill Crusher are as follows: After the material in the grinding machine housing is completely pulverized, it should stop the feed and turn off the motor. After the machine is idling for 3 minutes, press the stop button to stop the machine. When the machine is completely stopped, open the check door and check the wear of the vulnerable part. Fill in the corresponding production record, update the device status flag, which is convenient for the next time.
Let's take a look at the application characteristics of Needle Steam Jet Mill Crusher.
1, can effectively reduce cost, reduce cost, suitable for low value of coarse powder.
2, simple structure, convenient maintenance, less easy to lose weight, low operating noise, low energy consumption.
4, the inner wall smooth and wear, more conducive to the classification of materials.
5. Use a negative pressure operation to make it no dust to achieve environmental requirements.
6, running stable and reliable, its product can be uniform.
Needle Steam Jet Mill Crusher's daily maintenance is a very important part, which describes the maintenance method of Needle Steam Jet Mill Crusher.
1. When the machine is started or started, the appropriate amount of grease should be applied to ensure its life.
2. Check if the screws and nuts of each component are tightened. Check if the belt is stuck, whether it is tight.
3, regularly check the reliability of the equipment, prevent accidents or accidents.
5, equipment maintenance should be carried out by professional and technical personnel, other people must not be carried out so as not to damage the equipment.
6, electrical components and lines should be regularly checked, whether it is intact, whether the ground is reliable.
7. The equipment should be cleaned in time to prevent the next use to avoid contamination materials.
Elphen phosphate Needle Steam Jet Mill Crusher case sharing: This customer is in the development of production process, and it is no longer better than the performance of the phosphate's phosphate special crusher. The same type of equipment in other powder equipment companies is poor, even in some aspects, there is also a unique advantage. After experimenting, the company purchased NEEDLE Steam Jet Mill Crusher.
Technical parameters:
finished particle size: D50: 3μm
Production capacity: 400kg
Shandong Erpa is a company with more than 20 years of gas flow crusher research and development. After years of gradual precipitation and accumulation, experience is rich, with multiple patented technology. In the past many years of the gas flow, it has provided tens of thousands of equipment for domestic and foreign customers, and there will be a reputation that come to customers again to order our products again, which is enough to explain the word of mouth of Shandong El Pai airflow. Welcome to inquire!
