It is well known that this product technology in Small Steam Jet Mill Machine has been widely valued by the industry.
Small Steam Jet Mill Machine and cyclone separators, dust collectors and air machines have become a complete crushing system. After filtration of compressed air is dried, the high-speed nozzle is sprayed into the pulverized chamber, repeated collision, friction and shear at the intersection of the plurality of high pressure airflows, and pulverized the material. The crushing material moves from the rising airflow to the hierarchical region under the suction of the fan, generating a strong centrifuge generated by a high speed rotation. Under force, the fine particles are separated, and the cyclone and dust collectors are collected by the granular particles, and the coarse particles fall into the pulverized region to continue to be pulverized.Small Steam Jet Mill Machine Features:
The structure is reasonable, the operation is stable, the energy consumption is small, the crushing capacity is large, the size is small, and the cleaning is convenient.
2, the outer casing uses water cooling and its own air volume delivery crushing material, improves the temperature, and pulverizing the thermal material.
3, the wear of the blade is generated by the vibration of a large number of ultrasonic eddy currents generated on the back of the blade.
4, the structure is compact, there is no dust overflow problem.
For Small Steam Jet Mill Machine blocking troubleshooting, Xiaobi talks about your opinion, I hope to have some reference roles. Crushes blockage is the most common fault of machinery.
It may be one of the most common failures in mechanical design, but because improper operation can cause many faults.
(1) The feeding speed is too fast, the load is increased, causing blockage. In the aquaculture process, pay attention to the deflection angle of the current table pointer at any time. If the rated current is exceeded, the motor overload and long-term overload will burn the motor. This situation should be reduced or closed immediately, but it can also be changed by increasing the feed speed to control the feed speed. Because the energy rolling mill is fast, the load is large, and the load fluctuates. Therefore, the current of the rolling mill is generally controlled around 85% of the rated current.
(3) The water content, aging, screening, crushing and sealing material of the hammer hammer are too high, and the general grinding will be blocked. There is a need to regularly update the working state of the hammer aging and the serious aging, and check the screen regularly. Improve the production efficiency of universal grinding machines, improve the reliability of non-clogging and grinding.
Elphen phosphate SMALL Steam Jet Mill Machine case share: This customer is not more than domestic in China by comparing the performance of the phosphate's phosphate special crusher. The same type of equipment in other powder equipment companies is poor, even in some aspects, there is also a unique advantage. After experimenting, the company purchased Small Steam Jet Mill Machine.
Technical parameters:
Finished granularity: D50: 3μm
派 Technology recommends that you are using ultrafine air grade machine, jet classifier, powder When devices such as a classifier, be sure to pay attention to the performance of the device to check the performance of the device and prevent malfunctions during use.
