Steam Jet Mill Crusher For Hot Melt Glue As the names is a mechanical equipment applied to the production area, which is mostly used in pulverizing particles, fast pulverity, good precision.
Steam Jet Mill Crusher for Hot Melt Glue is an industrial equipment that consists of a ball mill, a vibration mill, and a power is 0.75 kW. With the development of society and the needs of people's lives, the industrial community is getting bigger and bigger, and the requirements for fineness, purity and pass rate are increasing, and the processing rate is very high. Micro-powder equipment is usually extremely expensive and low productivity.
Working principle: Transform the compressed air or overheating steam into a high-speed airflow through the nozzle, when the material is sent to the pulverizing chamber by the feeder, a strong impact and severe friction make the material smash A super fine product.
There are some industries like our food or chemicals, pharmaceutical industries, etc. It is made of material comminution. The coarse crusher is mainly used in the various industries to preprocessing, the main role is also a relatively large number of materials or relatively small particulate materials.
1. Preparation before departure. Check if the host, connector, pipeline, and the valve are normal, working properly.
2, open the machine
(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.
(2) From zero, gradually adjust to the specified speed.
(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the sequence of stops:
inverter-feeder-main air valve-compressor-grade impeller-motor cyclone material, dust removal switch-fan-main power supply-air compressor .
4, Maintenance
(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag, it should be cleaned orreplace.
5. Precautions
(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
ALPA gel method White Carbon Black Steam Jet Mill Crusher For Hot Melt Glue Case Sharing: The main products of this customer include beer silica gels, catalyst carriers, and the like.The company purchased our AlPa Steam Jet Mill Crusher For Hot Melt Glue.
Technical parameters:
Finished granularity: D50: 12-16UM 10-12UM
Production capacity: 250-450kg
ALPA Technology recommends that you are using ultrafine airflow classifiers,When a jet classifier, a powder classifier, etc., be sure to pay attention to the performance of the device periodically and prevent malfunctions during use.
