Jet Mills of Nitrendipine

Everyone knows that choosing a product or service, to understand from all aspects of the milling machine, service, quality, etc.

Jet Mills of Nitrendipine is reasonable, stable, low energy consumption, large crushing capacity, small size, no malfunction, and convenient cleaning and maintenance. Typically, the outer casing uses water-cooled and self-produced air volume, transporting a powder material, low temperature rise, and the thermal material can be pulverized. The blade wear is reduced by using a large number of ultrasonic vortices generated by the back surface of the blade and the high frequency pressure. Compact, no dust overflow.

Let's introduce the working principle of Jet Mills of Nitrendipine devices:

L, the hierarchical device uses the attachment of the wall of the jet to effectively combine the inertial force, centrifugal force, and suspension force to design a novelty. Ultrafine powder jet classifier. The grading machine reaches high precision, and can be graded, medium and fine powder three levels of products.
2, the jet classifier does not have any moving parts, and only high pressure air is working medium. Reliability for the classifier host, maintenance and maintenance is convenient. The adjustment of grading granularity is also very convenient, and only the flow meter and several gate valves disposed on the machine can be convenient to adjust the grading particle size.

In the production process, the temperature rise of the bearing must be often checked, and when the temperature rise exceeds 50 ° C, it should be closed, and the reason is to trigger the failure. When the new machine is running, the drive belt is easy to elongate, pay attention to adjust the proper looseness of the belt to ensure the work life of the belt. If the lifting piece should be checked frequently, replace the production quality and production in time. The blade, the bushing should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is roughly discovered to be replaced. The host and the grading flow bearing are lipomatic lubrication, using special lipids, the replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the interior space in the bearing cavity. Otherwise, It will cause too high of the bearing temperature. The spiral feeder has changed the lipid period of half a year, and Cape Calcium-based grease. In the output shaft E, ie the pulley E, avoiding the weight of the weight, damage the part. It is strictly forbidden to turn the handle on the stop. The lubricating oil used in this regulator is used with N32 alkaline high-zinc high-grade anti-motor oil pressure oil, and the deceleration machine is 401 generally lubricating oil, and it is not necessary to use other machines. After four or five months, new oil should be replaced.

ALPA Sulfite Jet Mills of Nitrendipine case Sharing: This customer is a Saudi company, which needs to be graded on potassium sulfate, and examine many of the international powder equipment company. Machine equipment.

Shan dong alpa is a source manufacturer specializing in Jet Mills of Nitrendipine. All the year round provides equipment for domestic and foreign customers. Welcome to inquire!